Votes - 5, Average rating: 3.6
(
)
)
|
manual abstract
‘2 Fasten finally. 11 Suspend the Fall Prevention Wire for the camera from the Camera Mounting Angle. The bracket is not shown in the illustrations. Note: Make sure that the wire matches the Fall Prevention Wire Fixing Angle. 4 Attach the camera to (he Camera I ^ Mounting Angle, turn the camera clockwise, and tighten the Mounting Screw (M3, supplied) •J O Place the Docoration Cover for the brack-I O et on the camera. Then, pull up the Slot Masking Cover (supplied). I U Attach the Fall Prevention Angle Clip (supplied) to the anchor Oolt. Attach the Fall Prevention Angle (supplied) to the bracket and the Falll Prevention Angle Clip. Note: Two anchor nuts are necessary for the anchor bolt. Instructions for the Fall Prevention Angle Clip (Supplied) 1. Remove the Fall Prevention Wire from the Fall Prevention Angle Clip. 2. Insert anchor bolt from side O- 3. Fold side o down over side O- 4. Suspend the Fall Prevention Angle Clip from the other end of the Fall Prevention Wire. above 1 Insert 2 Remove Side 0 f\3 Fold down Fall Prevention Wire Side O Anchor Bolt Fall Prevention Angle Clip (supplied) Fall Prevention Wire (supplied) Fall Prevention Angle Clip (supplied) Anchor Nut Used Anchor Bolt 15 Cover the bracket with the Heat Insulator (supplied). SPECIFICATIONS Ambient Operating Temperature: 10'C - +50'C (14*F - 122‘F) Dimensions: 120 (diameter) x 218 (D) mm [4-8/11 (diameter) x 8-9/16 (D)] Weight: 650 g (1.43 lbs) Weight and dimensions indicated are approximate. Specitications are subject to change without notice. STANDARD ACCESSORIES Fall Protection Wire.........................................1 pc. Fall Prevention Angle Clip...............................1pc. Ceiling Mounting Angle ..................................1pc. L-type Base Plate............................................1 pc. L-type Lock Plate.............................................1pc. Slot Masking Cover..........................................1pc. Hexagonal Socket Head Cap Screw (M4) .... 2pcs. Spanner ..........................................................ipc. Nut (M4) ........................................................4pcs. Screw (M3)......................................................2pc. Bracket Fixing Screw (M4xU8)......................4pcs. Template.........................................................1pc. Heat Insulator..................................................1pc. Matsushita Electric Industrial Co., Ltd. Central P.O. Box 288, Osaka 530-91, Japan STANDARD ACCESSORIES :all Protection Wire.........................................ipc. :all Prevention Angle Clip...............................1pc. Veiling Mounting Angle ..................................1pc. .-type Base Plate............................................1pc. .-type Lock Plate.............................................1pc. >lot Masking Cover..........................................1pc. hexagonal Socket Head Cap Screw (M4) .... 2pcs. Spanner .......................................................... 1pc Nut (M4) ........................................................4pcs Screw (M3)......................................................2pc Bracket Fixing Screw (M4xL8)......................4pcs Template.........................................................1pc Heat Insulator..................................................1pc Matsushita Electric Industrial Co., Ltd. Central P.O. Box 288, Osaka 530-91, Japan...