|
manual abstract
Refer to external equipment operating guide. HDMI TV HDMI HDMI Devices Note: The audio cable included with the TV should be used when connected with PC/ COMPONENT/S-VIDEO. Wall Mounting Use 4 machine screws(M4x8mm not included) to mount the TV on the Bracket(not included) For the Wall Bracket-Refer to the user instructions supplied with the wall bracket(not included) Remark: Wall mount is not applicable to 15 inch TV Basic Operating Instructions Basic Operating Instructions Turn on the LCD-TV STANDBY OPEN/CLOSE SCAN SWAP CALL MUTE 1 2 3 4 5 6 7 8 9 0 -/-- SOURCE DTV/DVD P+ P- V-V+ MENU ZOOM AUDIO STOP SETUP PAUSE/STEP REV FWD PREV NEXT D.MENU EXIT PROGRAM PLAY/ENTER SUBTITLE ANGLE TITLE/PBC SEARCH SLOW D.CALL 10+ A-B TUNE NICAMP. STD EPG OK FAV i REPEAT SIZE TIMEREVEAL MODE MIX TEXTSUBCODE HOLD DTV/RADIO LANG TIMER When the POWER(STANDBY) button on the remote control is pressed and the LCD-TV is turned on, the indicator light on the front of the LCD-TV changes from red to green. When the LCD-TV is turned off using the POWER(STANDBY) button, the LCD-TVwill go into standby mode and the indicator light turns red. You can also turn on the TV from standby mode by pressing the digits(1-9) or P+/-. The display will appear on the screen when the TV is turned on the first time: (Different displays for different countries, please see the real set) AUTO SEARCH AUTO SEARCH Or NO YES NO YES UNITED KINGDOM OTHER Press V+/-to adjust among countries list on the screen just according to the country you are in, P+/-to select the option and MENU to confirm. Audio Control 1.Press the V+ button to increase the volume. 2.Press the V-button to decrease the volume. Mute 1.Press the MUTE button to mute the sound temporarily. A mute icon appears on the screen. 2.Press the MUTE button again or V+ to restore the sound. The mute icon disappears. Basic Operating Instructions Basic Operating Instructions Select the TV Channel You can use the number keys on the remote control to directly select TV channels. The LCD-TV can store up to 100 channels , and you can press the keys on the remote control or on the panel to make a selection. 1. if you want to choose any channel from 0 to 9, please press the button until -is indicated on the screen and then press the relevant key on the remote control. -/- for example: if you want to choose channel 8, just press the Key number 8. 2.If you want to choose a channel bigger than 9, please press the -/- button until --is indicated on the screen. Enter the two digits of the channel number you want to watch.. for example: select channel 16 Note: if you want to choose one digit channel in this condition, you should press 0 first and then one digit number key. Picture Mode Press P.STD button on the remote control for menu display . For desired mode as follows: PERSONAL STANDARD MILD FRESH Program Swap 1 Suppose the channel number you used is now channel 8 and the channel number you are using is 18 (as shown in the figure). 2 If you want to return...
Other models in this manual:Televisions - L15T11W-C (1.68 mb)
Televisions - L22T11W-A (1.68 mb)
Televisions - L19T11W-A (1.68 mb)
Televisions - L19T12W-A (1.68 mb)