Votes - 2, Average rating: 4.5
(
)
)
|
Other manuals for this model:
manual abstract
To prevent electric shock, do not remove screws or covers. There are no user-serviceable parts inside. Ask qualified service personnel for servicing. 2. Handle the camera with care. Do not abuse the camera. Avoid striking, shaking, etc. The camera could be damaged by improper handling or storage. 3. Do not expose the camera to rain or moisture, or try to operate it in wet areas. Turn the power off immediately and ask qualified service personnel for servicing. Moisture can damage the camera and also create the danger of electric shock. 4. Do not use strong or abrasive detergents when cleaning the camera body. Use a dry cloth to clean the camera when dirty. In case the dirt is hard to remove, use a mild detergent and wipe gently. Afterwards, wipe off the remained part of the detergent in it with a dry cloth. 5. Clean the lens faceplate with care. Do not clean the lens with strong or abrasive detergents. Use lens tissue or a cotton tipped applicator and ethanol. 6. Never face the camera towards the sun. Do not aim the camera at bright objects. Whether the camera is in use or not, never aim it at the sun or other extremely bright objects. Otherwise, blooming or smear may be caused. 7. Do not operate the camera beyond the specified temperature, humidity or power source ratings. Use the camera under conditions where temperature is between –10 °C to +50 °C (14 °F to 122 °F), and humidity is below 90 %. The input power source is 12 V DC, 240 mA. 8. It is recommended to use a monitor whose resolution is at least equal to that of the camera. PRECAUTIONS +12V – +12 V - q w e r o u i y t AP Soft AP Sharp BLC OFF BLC ON ON 1 2 MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS q Camera Panel w Panning/Tilting/Azimuth Table Adjusts the panning/tilting angle of the camera. e Focus Lever Fixes the focus position after adjusting. r Zoom Lever Fixes the zoom position after adjusting. t Video Output Terminal Connects to the video input connector of a monitor. y DC 12 V Input Terminal Connects to the 12 V DC, 240 mA power supply. Connection should be made in accordance with the !/@ signs of PCB. u Back Light Compensation Mode Selector (BLC ON, OFF) ON: Select this when the brightness level of the background is higher than the object. OFF: Select this when you can view the object without backlight. The factory default setting is OFF. i Aperture Level Selector (AP Sharp/Soft) Sharp: Sharpens the image outline. Soft: Softens the image outline. The factory default setting is Sharp. Note: Set the selector to Soft when a quad system is connected to this camera. o Video Jack (3.5 diam. mini jack) Connect the LCD monitor and such devices with 3.5 diam. 2-pole L-type plug for checking images. !0 Panel Cover !0 Caution: To prevent fire or electric shock hazard, use a UL listed cable (WV-1, style 1007) for the DC 12 V Input Terminal. Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. Ns0902-0 3TR001242AAA Printed in China Model No. WV-CF212 Color CCTV Camera Operating Instructions PREFACE Panasonic’s WV-CF212 series digital signal processing color CCD cameras uses a 1/4-inch interline transfer CCD image sensor having 768 horizontal pixels (picture elements), and digital signal processing LSI’s. This model is designed for video surveillance. INSTALLATIONS 46 mm (1.81") 83.5 mm (3.29") Front / Upper Cable access hole 35° 6-o4.5(0.18") o130 (5.12") Installation dimensional drawing WARNING • The following installation should be made by qualified service personnel or system installers and should confirm to all local codes. • Be sure to use a ceiling board/wall having enough strength to support this camera. ¦ Camera mounting position Notes: • Remove the panel cover before the mounting procedure. (Refer to Step 1 to 4 of "How to mount the camera" on the next page.) • Procure four mounting screws locally. To mount the camera on a junction box Note: If you mount the camera on a junction box, procure one locally that meets the dimensions in the figure below. 1. Install the junction box to the wall/ceiling. 2. Attach the four mounting screws to the junction box. 3. Fix the camera and the junction box. Then, turn the camera clockwise. 4. Fasten all the mounting screws. To mount the camera directly on the wall/ceiling 1. Cut out the panel according to the concave. (Refer to the figure on the right.) 2. Prepare a space, which is o155 mm (6.1") or larger, on the wall/ceiling. 3. Attach the four mounting screws to the wall/ceiling. (Refer to "Installation dimensional drawing".) 4. Fix the camera and the wall/ceiling. Then, turn the camera clockwise. 5. Fasten all the mounting screws. Camera mounting screw x 4 Shown figure is an example for junction box. 46 mm (1-13/16") 83,5 mm (3-5/16") The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying t...