Votes - 4, Average rating: 4.3 ( )

Manafacture: ABC Office File size: 537.51 kb File name: Language of manual:

9. Plug the power supply into the closest outlet. We do not recommend using an extension cord for the system. 10. Test the system by placing one of the hard tags into the system. The system will beep approximately 1-1/2 seconds then reset. If a hard tag is held in the system it will continue to alarm. Text Box: 4 Text Box: 1. The tag should be visible to the customer. 2. Tag uniformly, it speeds up removal. 3. Tag near a price label. It assists in the removal. 4. Place the tag as high as possible when tagging silks & light or stretchy fabrics. 5. Except for leather goods we do not recommend locating the tag at the seams. The seams are easily cut open to remove the pin. 6. Avoid placing tags on waistbands, cuffs, hems or perimeters. They can be easily cut off. 7. Insert pins through the garment then gently push into the tag. 8. Never force the pin into the tag. 9. Never use bent pins. Text Box: TAGGING GUIDELINES Text Box: 5 Text Box: One Piece Bathing Suit Text Box: Bikini Bathing Suit Text Box: Pants Text Box: Dresses Text Box: TAGGING GUIDELINES Text Box: 6 Text Box: Purses Text Box: Belts Text Box: Tennis Shoes Text Box: Shoes Text Box: TAGGING GUIDELINES Text Box: 7 Text Box: 3. Remove the pin and hard tag from the detacher and store for future use. Text Box: 2. Remove the pin by holding the hard tag to the detacher and pulling straight up on the pin or garment. Text Box: 1. Place the hard tag into the detacher with the pin facing up. Text Box: REMOVING HARD TAG Text Box: 8 Text Box: It is possible for the locking mechanism to become jammed when the pin is pulled extremely hard. It is possible to un-jam the pin so that you will be able to remove it when needed. The first step is to place the hard tag into the detacher then press on the head of the pin. This should release the pressure on the locks allowing you to remove the pin. If you are still unable to release the pin you can tap the locking mechanism (raised area) on the corner of the sales counter, then put the hard tag back into the detacher. The pin should now release. Text Box: REMOVING HARD TAG Text Box: 3 Foot No Tag Zone Text Box: 4-1/2 Foot No Tag Zone Text Box: 4-1/2 Foot No Tag Zone Text Box: The SP-1 system will detect hard tags within 4 feet to each side and 3 feet in front of and back of the antenna. We recommend that you keep all merchandise with hard tags a minimum of 4-1/2 feet from the sides of the system and 3 feet from the front of and back of the system. This will reduce the possibility of the system being alarmed by the displayed merchandise. Text Box: 9 Text Box: DETECTION AREA Text Box: 10 Text Box: There are three reasons for the system to alarm: 1. The REAL alarm: The occurrence of a shoplifting attempt. 2. The ACCIDENTAL alarm: a) Personnel neglected to remove a tag at the point of sale. b) An electronic security access card has been carried into the store by a customer, or c) A previously purchased product, with an active tag, from another store using a similar ...

Download now

Please, enter two numbers from picture: