Votes - 3, Average rating: 3.7
(
)
)
|
Other manuals for this model:
manual abstract
To preset CATV (Cable Television) channels, select CATV. TUNER C AAB12 PROG. 1 NORMAL / CATV CHANNEL SET PAY - TV / CANAL+ AFT FINE TUNING NORMAL OFF ON RETURN SELECT : SET : EXIT : OK MENU • PROG Press PROG +/– to select the desired Selected programme programme position. position SET : SELECT : OK MENUEXIT : TUNER C AAB12CHANNEL SET PROG. NORMAL / CATV PAY - TV / CANAL+ NORMAL 51 AFT FINE TUNING ON OFF RETURN OK PLAY Press M/m to highlight CHANNEL SET, then press OK. TUNER C AAB12 PROG. NORMAL / CATV CHANNEL SET PAY - TV / CANAL+ AFT FINE TUNING ON RETURN 51 SELECT : CONFIRM : EXIT : OK MENU OK PLAY Press M/m to select the PAY-TV/Canal Plus channels, then press OK. TUNER C LMN02 PROG. 5 NORMAL / CATV CHANNEL SET PAY - TV / CANAL+ AFT FINE TUNING NORMAL OFF ON RETURN 1 SELECT : SET : EXIT : OK MENU OK PLAY Press M/m to highlight PAY-TV/CANAL+, then press OK. TUNER PROG. 5 NORMAL / CATV CHANNEL SET PAY - TV / CANAL+ AFT FINE TUNING NORMAL ON OFF RETURN 1 SELECT : CONFIRM : EXIT : OK Getting Started MENU continued 39 Setting the PAY-TV/Canal Plus decoder (not available on SLV-SE600A) 14 14 OK PLAY Press M/m to highlight ON, then press OK. SET : SELECT : OK MENUEXIT : TUNER C LMN02 PROG. 5 NORMAL / CATV CHANNEL SET PAY - TV / CANAL+ AFT FINE TUNING NORMAL ON ON RETURN 1 15 15 Press MENU to exit the menu. MENU Tip • If you want to return to the previous menu, highlight RETURN and press OK. Notes • The menu disappears automatically if you don’t proceed for more than a few minutes. • To superimpose subtitles while watching PAY-TV/Canal Plus programmes, make both decoder-VCR and VCR-TV connections using 21-pin Scart cables that are compatible with the RGB signals. You cannot record subtitles on the VCR. • When you watch PAY-TV/Canal Plus programmes through the RFU input of the TV, press t TV/VIDEO so that the VIDEO indicator appears in the display window. *1 SLV-SE800D1/D2/E and SX800D only *2 SLV-SE600E, SX600E, SE650D, SE700D1/D2/E1/E2, and SX700D/E only Setting the PAY-TV/Canal Plus decoder (not available on SLV-SE600A) Basic Operations Playing a tape Basic Operations 1 2 3 4 5 6 7 8 9 0 ZEJECT CLEAR DISPLAY HPLAY XPAUSE M FF x STOP m REW NTSC PB Turn on your TV and set it to the video channel. Insert a tape. The VCR turns on and starts playing automatically if you insert a tape with its safety tab removed. continued Playing a tape 3 3 OK PLAY Press H PLAY. When the tape reaches the end, it will rewind automatically. Additional tasks To Press Stop play x STOP Pause play X PAUSE Resume play after pause X PAUSE or H PLAY Fast-forward the tape M FF during stop Rewind the tape m REW during stop Eject the tape Z EJECT To play an NTSC-recorded tape Set NTSC PB at the rear of the VCR according to the colour system of your TV. When your TV is Set NTSC PB to PAL only ON PAL TV PAL and NTSC NTSC 4.43 To use the time counter Press CLEAR at the point on the tape that you want to find later. The counter in the display window resets to “0:00:00.” Search for the point afterwards by referring to the counter. SP VIDEO OPC To display the counter on the TV screen, press DISPLAY. Playing a tape Notes • The counter resets to “0:00:00” whenever a tape is reinserted. • The counter stops counting when it comes to a portion with no recording. • The time counter does not appear on the TV screen when using an NTSC-recorded tape. • Depending on your TV, the following may occur while playing an NTSC-recorded tape: – The picture becomes black and white. – The picture shakes. – No picture appears on the TV screen. – Black stre...
Other models in this manual:Tape Players - SLV-SE600A (1.13 mb)
Tape Players - SLV-SE600E (1.13 mb)
Tape Players - SLV-SE650D (1.13 mb)
Tape Players - SLV-SE700D1 (1.13 mb)