Votes - 2, Average rating: 3.5
(
)
)
|
Other manuals for this model:
manual abstract
Additional tasks To Press Stop play x STOP Pause play X PAUSE Resume play after pause X PAUSE or H PLAY Fast-forward the tape M FF during stop Rewind the tape m REW during stop Eject the tape Z EJECT To play an NTSC-recorded tape Set NTSC PB at the rear of the VCR according to the colour system of your TV. When your TV is Set NTSC PB to PAL only ON PAL TV PAL and NTSC NTSC 4.43 To use the time counter Press CLEAR at the point on the tape that you want to find later. The counter in the display window resets to “0:00:00.” Search for the point afterwards by referring to the counter. SP VIDEO OPC To display the counter on the TV screen, press DISPLAY. Playing a tape Notes • The counter resets to “0:00:00” whenever a tape is reinserted. • The counter stops counting when it comes to a portion with no recording. • The time counter does not appear on the TV screen when using an NTSC-recorded tape. • Depending on your TV, the following may occur while playing an NTSC-recorded tape: – The picture becomes black and white. – The picture shakes. – No picture appears on the TV screen. – Black streaks appear horizontally on the TV screen. – The colour density increases or decreases. • If you play back a tape in LP or EP mode with the NTSC system, the sound becomes monaural. • While setting the menu on the TV screen, buttons for playback on the remote commander do not function. Starting playback automatically with one button (One Touch Play) (not available on SLV-SE600A/E and SX600E) If you use the SMARTLINK connection, you can turn on the VCR and the TV, set the TV to the video channel, and start playback automatically with one button. 1 Insert a tape. The VCR automatically turns on. If you insert a tape with its safety tab removed, the TV turns on and switches to the video channel. Playback starts automatically. 2 Press H PLAY. The TV turns on and switches to the video channel automatically. Playback starts. Tip • When there already is a tape in the VCR, the VCR and the TV turn on, the TV is set to the video channel, and playback starts automatically in one sequence when you press H PLAY. Note • When you use the One Touch Play function, leave the TV on or in the standby mode. Basic Operations Playing a tape Recording TV programmes 1 2 3 4 5 6 7 8 9 0 COUNTER/ REMAIN DISPLAY SP/LP t TV/VIDEO PROG +/– zREC x STOP 1 Turn on your TV and set it to the video channel. To record from a decoder, turn it on. 2 Insert a tape with its safety tab in place. Recording TV programmes Press PROG +/– to select the programme position or station name*1 you want to record. • PROG VIDEOSP OPC Press SP/LP to select the tape speed, SP or LP. LP (Long Play) provides recording time twice as long as SP. However, SP (Standard Play) produces better picture and audio quality. SP / LP LP VIDEO OPC REC Press z REC to start recording. The recording indicator lights up red in the display window. Recording indicator LP VIDEO OPC To stop recording Press x STOP. To check the remaining time Press DISPLAY. With the display on, press COUNTER/REMAIN to check the remaining time. Each time you press COUNTER/REMAIN, the time counter and the remaining time appear alternately. The indicator indicates the remaining time. Basic Operations 61: 4 SP Time counter Remaining time In order to get an accurate remaining time indication, be sure TAPE LENGTH in the OPTIONS-1 menu is set according to the tape type you use (see page 79). To watch another TV programme while recording 1 Press t TV/VIDEO to turn off the VIDEO indicator in the display window. 2 Select a...
Other models in this manual:Tape Players - SLV-SE600A (1.13 mb)
Tape Players - SLV-SE650D (1.13 mb)
Tape Players - SLV-SE700D1 (1.13 mb)
Tape Players - SLV-SE700D2 (1.13 mb)