Votes - 4, Average rating: 4
(
)
)
|
manual abstract
IN jack with included RF Cable accessory. TV VCR IN FROM ANT. VHF/UHF OUT TO TV IN from ANT./CABLE Cable TV Converter Box 1 2 Please make all cable or antenna connections before plugging into the AC outlet. Plugging the VCR Power Cord into an AC wall outlet starts auto channel and clock set. 1 1 2 2 2 1 WARNING Over tightening “Nut type” RF coaxial cables may damage jacks. Finger tighten only. 1 Turn TV on and tune to channel 3. 2 Plug VCR Power Cord into AC wall outlet. VCR comes on and auto channel and clock set starts. • If screen below does not appear, check VCR - TV connection and, if TV is tuned to channel 3, try switching it to channel 4. • To change VCR’s output channel, please refer to “VCR’s Output Channel” in Advanced Operations book (p. 12). If you use a cable box, turn it on and set it to the Public Broadcasting Station (PBS) channel in your time zone. If you use a DSS receiver, it must be turned off. 3Settings are made automatically. When setup is done, this screen appears. Initial Setup (Ready to Play) 4 SELECT CONNECTION screen is displayed. (If ANT./Cable . VCR . TV connection,) press * to select “VCR TV”, or “VCR CABLE/DSS BOX TV”, and press to set. (If DSS/Cable Box . VCR . TV connection,) press to select “CABLE/DSS BOX VCR TV” and press to set. Verify the output channel of your cable box or DSS receiver and press to select and to enter that channel number. Plugging the AC Power Plug into an AC outlet If “AUTO CLOCK SET IS INCOMPLETE” appears, manually set clock. See below. If Auto Clock Set was incomplete. aPress ACTION on remote to display CLOCK screen. bPress to select the month and to set. In the same manner, select and set the date, year, time, and DST (Daylight Saving Time). cPress ACTION to start clock, and go to step 4 above. Manual Clock Set CH AUTO SET PROCEEDING CANCEL : STOP 9 /29 / 20 0 2 SUN 2 : 20PM DST : ON SETT I NG : CH 10 AUTO CLOCK SET COMPLETED VCR C / A CLOCK CH SELECT CONNECTION VCR TV CABLE / DSS BOX VCR TV VCR CABLE / DSS BOX TV VCR C / A CLOCK CHANNEL SELECT : SET : EXIT : ACT I ON SELECT CONNECTION CABLE / DSS BOX OUTPUT CH CH 0 1 CABLE / DSS BOX VCR TV VCR C / A CLOCK CHANNEL SELECT : SET : EXIT : ACT I ON SELECT CONNECTION VCR TV CABLE / DSS BOX VCR TV VCR CABLE / DSS BOX TV VCR C / A CLOCK CHANNEL SELECT : SET : EXIT : ACT I ON AUTO CLOCK SET IS INCOMPLETE PLEASE SET CLOCK BY PRESSING ACTION KEY VCR C / A CLOCK CH SELE CT MONTH DST:ON 1 / / : VCR C / A CLOCK CH SELECT : SET : EXIT : ACT I ON Congratulations on your new purchase! With proper use, this dependable product will provide years of enjoyment. Please fill in the information below. (Serial number is on tag on back of VCR.) • Date of Purchase • Dealer Purchased From • Dealer Address • Dealer Phone No. • Model No. • Serial No. RF Coaxial Cable VJAS0196 Remote Control Batteries 2 “AA” LSSQ0313 (PV-V4612) LSSQ0343 (PV-V4612S) Accessories To order accessories, call toll free 1-800-332-5368. VCR+ Loading the Batteries Battery replacement caution • Do not mix old and new batteries. • Do not mix alkaline with manganese batteries. Prevent Accidental Tape Erasure Record Tab Screw driver Cover the hole with cellophane tape. Break off the tab to To record again prevent recording. Only use tapes with the mark in this unit. Record/Playback Time 2 Hours 40 Minutes SP (Standard Play) 1 Hour 2 Hours 5 Hours 2 Hours 4 Hours 20 Minutes LP (Long Play) 3 Hours 6 Hours 8 Hours SLP (Super Long Play) Type of Video Cassette Tape Speed Setting T60 T120 T160 Use soft, dry cloth or dusting attachment of a vacuum to remove dust from all cabinet vent holes. You may moisten cloth with nonabrasive, antistatic cleaner/ polisher. Caution: Alcohol and various solvents could damage finish. Cleaning the VCR Power Source: 120 V AC, 60 Hz Power Consumption:Power On Approx. 23 W Power Off Approx. 3.0 W Video Signal: EIA Standard NTSC color Video Recording 4 rotary heads helical System: scanning system Audio Track: 1 track (Normal) 2 channel Hi-Fi Audio Sound Tuner: Broadcast Channels: VHF 2 ~ 13, UHF 14 ~ 69 CABLE Channels: Midband A ~ I (14 ~ 22) Superband J ~ W (23 ~ 36) Hyperband AA ~ EEE (37 ~ 64) Lowband A-5 ~ A-1 (95 ~ 99) Special CABLE channel 5A (01) Ultraband 65 ~ 94, 100 ~ 125 Operating Temperature: 5 °C ~ 40 °C (41 °F ~ 104 °F) Operating Humidity: 10 % ~ 75 % Weight: 2.7 kg (6.0 lbs). Dimensions: 430 (W) x 98 (H) x 242 (D) mm 16-15/16” (W) x 3-7/8” (H) x 9-9/16” (D) inch Specifications Note: Designs and specifications are subject to change without notice. Digital Auto Picture Automatically controls the video output signal for less noise depending on the tape condition. Digital Auto Tracking Continuously analyzes the signal and adjusts for optimum picture quality. Manual Tracking Control (to reduce picture noise) Use during Playback and Slow Motion mode to reduce picture noise. Press CH (TRACKING) / on the remote control or on the VCR until the picture clears up. To return to Auto Tracking, press POWER off, then on again a few se...