Votes - 2, Average rating: 4.5 ( )

Manafacture: Sony File size: 15.23 mb File name: Language of manual:

Photos and specs  Sony  HDR-XR200E

Other manuals for this model:

Cameras - HDR-XR200E (2.31 mb)

Cameras - HDR-XR200E (35.58 mb)

Cameras - HDR-XR200E (34.7 mb)

Cameras - HDR-XR200E (35.44 mb)

Show all

Cameras - HDR-XR200E (3.87 mb)

Cameras - HDR-XR200E (29.63 mb)

Battery pack This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Supplied items The numbers in ( ) are the supplied quantity. . AC Adaptor (1) . Power cord (Mains lead) (1) . Component A/V cable (1) . . A/V connecting cable (1) . . USB cable (1) . . Wireless Remote Commander (1) (only for HDR-XR200E/XR200VE) A button-type lithium battery is already installed. Remove the insulation sheet before using the Wireless Remote Commander. Insulation sheet . Rechargeable battery pack NP-FH60 (1) . CD-ROM “Handycam Application Software” (1) “PMB” (software, including “PMB Guide”) “Handycam Handbook” (PDF) . “Operating Guide” (This manual) (1) See page 41 for the “Memory Stick” media you can use with this camcorder. Notes on use Using the camcorder The camcorder is not dustproofed, dripproofed or waterproofed. See “Precautions” (p. 51). Do not do any of the following when the (Movie)/ (Photo) mode lamps (p. 12) or the ACCESS lamps (p. 10), the access lamp (p. 41) are lit or flashing. Otherwise, the recording media may be damaged, recorded images may be lost or other malfunctions could occur. ejecting the “Memory Stick PRO Duo” media removing the battery pack or AC Adaptor from the camcorder Do not apply shock or vibration to the camcorder. The camcorder may not be able to record or play movies and photos. Do not use the camcorder in very loud areas. The camcorder may not be able to record or play movies and photos. When connecting the camcorder to another device with communication cables, be sure to insert the connector plug in the correct way. Pushing the plug forcibly into the terminal will damage the terminal and may result in a malfunction of the camcorder. Do not close the LCD screen when the camcorder is connected to another device with the USB cable. Your recorded images may be lost. Even if the camcorder is turned off, the GPS function is working as long as the GPS switch is set to ON. Make sure that the GPS switch is set to OFF during take off and landing of an airplane (HDR-XR200VE). To protect the internal hard disk from shock by dropping, the camcorder has drop sensor function. When a drop occurs, or under a non- gravity condition, the block noise made when this function is activated by the camcorder may also be recorded. If the drop sensor catches a drop repeatedly, recording/playback may be stopped. When the temperature of the camcorder becomes extremely high or extremely low, you may not be able to record or play back on the camcorder, due to the protection features of the camcorder being activated in such situations. In this case, a message appears on the LCD screen (p. 50). Do not turn on the camcorder in a low-pressure area, where the altitude is more than 5,000 meters (16,000 feet). Doing so may damage the hard disk drive of the camcorder. If you repeat recording/deleting images for a long time, fragmentation of data occurs on the recording media. Images cannot be saved or recorded. In such a case, save your images on some type of external media first, and then perform [MEDIA FORMAT] (p. 39). The LCD screen is manufactured using extremely high-precision technology, so over 99.99% of the pixels are operational for effective use. However, there may be some tiny black points and/or bright points (white, red, blue, or green in color) that appear constantly on the LCD screen. These points are normal results of the manufacturing process and do not affect the recording in any way. On recording Before starting to record, test the recording function to make sure the image and sound are recorded without any problems. Compensation for the contents of recordings cannot be provided, even if recording or playback is not possible due to a malfunction of the camcorder, recording media, etc. TV color systems differ depending on the country/region. To view your recordings on a TV, you need a PAL system-based TV. Television programs, films, video tapes, and other materials may be copyrighted. Unauthorized recording of such materials may be contrary to the copyright laws. To prevent your image data from being lost, save all your recorded images on external media periodically. It is recommended that you save the image data on a disc such as DVD-R using your computer. Also, you can save your image data using a VCR, or a DVD/HDD recorder. On playing back recorded images on other devices The camcorder is compatible with MPEG-4 AVC/H.264 High Profile for high definition image quality (HD) recording. Therefore, you cannot play back images recorded with high definition image quality (HD) on the camcorder with the following devices; Other AVCHD format compatible devices which are not compatible with High Profile Devices which are not compatible with the AVCHD format Discs recorded with high definition image ...

Download now

Please, enter two numbers from picture: