Votes - 4, Average rating: 5 ( )

Manafacture: Frigidaire File size: 3.35 mb File name: 2bb60dbe-53c5-476e-8cc4-ca81ece82d4b.pdf Language of manual:

4). CONTINUE holding the pad until "12 Hr"(Fig. 5) or "24 Hr" appears in the display. 2. Press @ to switch between the 12 and 24 hour time of day display. The display will show either "12 Hr" (Fig. 5) or "24 Hr" (Fig. 6). Fig. 5 3. Press _ to accept the desired change or press _ to reject the change. 4. Reset the correct time as described in To set the Clock above. Fig. 6 Please note that if the 24 hour time of day mode was chosen, the clock will now display time from O:OOthrough 23:59 hours. 17 Setting Oven Controls • Continuous Bake or Twelve Hour Energy Saving Mode • Kitchen Timer Setting Continuous Bake or 12 Hour Energy Saving The KITCHEN TIMER @ and FLEX CLEAN @ pads control the Continuous Bake or 12 Hour Energy Saving features. The oven control has a factory preset built-in 12 Hour Energy Saving feature that will shut off the oven if the oven control is left on for more than 11 hours and 59 minutes. The oven can be programmed to override this feature for INSTRUCTIONS PRESS DISPLAY Continuous Baking. To set the control for Continuous Bake or 12 Hour Energy Saving features: Fig. 1 1. Press and hold @ for 6 seconds (Fig.1). "12:Hr" or "--:Hr" for6 seconds will appear in the display and the control will beep once. 2. Press _ to switch between the 12 Hour Energy Saving and Fig. 2 continuous bake features. Note: "12:Hr" (Fig. 2) in the display indicates the control is set for 12 Hour Energy Saving feature and "--:Hr" (Fig. 3) indicates the control is set for the Continuous Bake feature. 3. Press _ to accept the change (Fig. 4; display will return to time of day) or press _ to reject the change. Fig. 4 Setting Kitchen Timer The KITCHEN TIMER _ pad controls the Kitchen Timer feature. The Kitchen Timer serves as an extra timer in the kitchen that will beep when the set time has run out. It does not start or stop cooking. The Kitchen Timer feature can be used during any of the other oven control functions. Refer to "Minumum & Maximum Control Pad Settings" on page 16 for time amount settings. INSTRUCTIONS PRESS DISPLAY To set the Kitchen Timer (example for 5 minutes): 1. Press _. "0:00" will appear and "TIMER" will flash in the @ display (Fig. 5). Fig. 5 2. Press the number pads to set the desired time in the display (example (_). Press (_. The time will count down with "5:00" and "TIMER" will show in the display (Fig. 6). Fig. 6 Note: If (_ is not pressed the timer will return to the time of day. 3. When the set time has run out, "End" and "TIMER" will show in the display (Fig. 7). The clock will sound with 3 beeps every 15 seconds until @ is pressed. @ Fig. 7 To cancel the Kitchen Timer before the set time has run out: Press @. The display will return to the time of day. @ 18 Setting Oven Controls • Oven Lockout • Temperature Display OVEN Setting Oven Lockout Feature LOCKOUT The _ pad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven door, prevents the Warmer Drawer and most oven controls from being turned ON. It does not disable the clock, Kitchen Timer or the interior oven lights. INSTRUCTIONS PRESS DISPLAY To activate the Oven Lockout feature: 1. Press and hold _ for 3 seconds (Fig. 1). _for 3 seconds 2. After 3 seconds a beep will sound, LOC will appear and "DOOR Fig. 1 LOCKED" will flash in the display. Once the oven door is locked the "DOOR LOCKED" indicator will stop flashing. To reactivate normal oven operation: 1. Press and hold _ for 3 seconds. A beep will sound. LOC will _for 3 seconds clear. The "DOOR LOCKED" will continue to flash until the oven door has completely unlocked (See Fig. 2). 2. The oven is again fully operational. Fig. 2 Setting Temperature Display m Fahrenheit or Celsius /TTC'_ The BROIL _ and FLEX CLEAN _ pads control the Fahrenheit or Celsius temperature display modes. The oven control can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to display in Fahrenheit. INSTRUCTIONS PRESS DISPLAY To change display from Fahrenheit to Celsius or Celsius to Fahrenheit: 1. To tell if the display is set for Fahrenheit or Celsius press _for7seconds (Fig. 3) and hold for 7 seconds; "550 °'' will first appear in the display and then a beep will sound. If "F" appears, the display is set to show temperatures in Fahrenheit (Fig. 4). If "C" Fig. 3 appears, the display is set to show temperatures in Celsius (Fig. 5). 2. Press @ to switch between Fahrenheit or Celsius display Fig. 4 modes. The display will show either "F" (Fig. 4) or "C" (Fig. 5). 3. Press (_ to accept the change or press _ to reject the change. Fig. 5 19 Setting Oven Controls • Silent Control Operation • Saving & Recalling Recipe Settings Setting Silent Control Operation The DELAY START @ and FLEX CLEAN @ pads control the Silent Control operation feature. The Silent Control operation feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control can be programmed for silent operation and lat...

Download now

Please, enter two numbers from picture: