Login:
Votes - 3, Average rating: 4 ( )

User manual Sony, model DCR-DVD109E

Manafacture: Sony
File size: 5.5 mb
File name:
Language of manual:en
Photos and specs  Sony  DCR-DVD109E
Free link for this manual available at the bottom of the page



manual abstract


Connect your camcorder to the wall socket using the supplied AC Adaptor for this operation (p.20). Refer also to the instruction manuals supplied with the devices to be connected. 21: Signal flow A/V OUT jack S VIDEO VIDEO AUDIO (Yellow) (White) (Red) VCRs or TVs IN VIDEO AUDIO (White) (Red) IN Device without S VIDEO jack Device with S VIDEO jack 1 A/V connecting cable (supplied) Connect to the input jack of the other device. 2 A/V connecting cable with S VIDEO (optional) When connecting to another device via the S VIDEO jack, by using an A/V connecting cable with an S VIDEO cable (optional), higher quality pictures can be produced than with an A/V connecting cable. Connect the white and red plug (left/right audio) and the S VIDEO plug (S VIDEO channel) of the A/V connecting cable with an S VIDEO cable (optional). The yellow plug connection is not necessary. S VIDEO connection only will not output audio. When your TV is connected to a VCR Connect your camcorder to the LINE IN input on the VCR. Set the input selector on the VCR to LINE (VIDEO 1, VIDEO 2, etc.), if the VCR has an input selector. To set the aspect ratio according to the connected TV (16:9/4:3) Change the setting according to the screen aspect ratio of the TV you will view pictures on. 1 Turn the POWER switch to turn on your camcorder. 2 Touch (HOME) t (SETTINGS) t [OUTPUT SETTINGS] t [TV TYPE] t [16:9] or [4:3] t . b Notes • When you set [TV TYPE] to [4:3], the image quality may deteriorate. Also, when the recorded picture’s aspect ratio switches between 16:9 (wide) and 4:3, the image may jitter. • When you play back a picture recorded in 16:9 (wide) aspect ratio on a 4:3 TV not compatible with the 16:9 (wide) signal, set [TV TYPE] to [4:3]. When your TV is monaural (When your TV has only one audio input jack) Connect the yellow plug of the A/V connecting cable to the video input jack and connect the white (left channel) or the red (right channel) plug to the audio input jack of your TV or VCR. z Tips • You can display the counter on the TV screen by setting [DISP OUTPUT] to [V-OUT/PANEL] (p. 69). If your TV/VCR has a 21-pin adaptor (EUROCONNECTOR) Use a 21-pin adaptor (optional) to view playback picture. TV/VCR Recording/ Playback 41 Making the disc compatible with playback on other devices or DVD drives (Finalizing) Finalizing makes the recorded disc compatible for playback with other devices and DVD drives of computers. Before finalizing, you can select the style of the DVD menu which displays the image list (p. 45). Whether finalizing is required depends on the type of disc. DVD-RW/DVD-R/DVD+R DL require finalizing. DVD+RW do not require finalizing except in the following cases: 1 To create a DVD menu 2 To play back on a computer DVD drive 3 If the disc has a short total recording time (less than 5 min in HQ mode, 8 min in SP mode, or 15 min in LP mode) b Notes • Playback compatibility with all device is not guaranteed. • No DVD menu is created for DVD-RW (VR mode). Operation flow To play back a disc in a DVD device for the first time (p.44) FinalizeFinalizeFinalizeMakedesired settingsfor the DVD menu. Incase1, 2 or 3. Playback on other DVD device Recording/ Playback To add recordings to a finalized disc Recording/ Playback To add recordings to a finalized disc (p.58) b Notes • Even when you are using a DVD-RW or DVD+RW, you cannot record additional movies onto the disc after finalizing the disc during Easy Handycam operation. To do so, cancel Easy Handycam operation (p. 31). Make a new recording Recordings cannot be added. Unfinalize the disc. When the DVD menu has been created, a confirmation screen prompts you to confirm that you wish to add a recording. Recordings can be added as usual. To play back a disc in a DVD device after adding a recording (p.44) FinalizeFinalizeFinalizeOnly in case 1Makedesired settingsfor the DVD menu. Playback on other DVD device Continued , 43 Making the disc compatible with playback on other devices or DVD drives (Finalizing) (Continued) Finalizing a disc b Notes • It takes from a minute to a maximum of several hours to finalize a disc. The shorter the amount of material recorded on the disc, the longer it takes for finalizing. • Use the AC Adaptor as the power source to prevent your camcorder from running out of power during finalizing. • When you finalize a double-sided disc, you must finalize each side of the disc individually. 1 Place your camcorder in a stable position, and connect the AC Adaptor to the DC IN jack on your camcorder. 2 Turn on the power by turning the POWER switch. 3 Insert the disc that you want to finalize. 4 Touch (MANAGE DISC/ MEMORY) of the (HOME) menu t [FINALIZE]. To select a DVD menu style, touch (OPTION) t [DVD MENU] (p. 45). Go to step 5 if you want to finalize the disc using [STYLE1] (default setting). 5 Touch [YES] t [YES]. Finalizing starts. 6 When [Completed.] appears, touch . b Notes • Do not apply shock or vibration to your camcorder, and do not disconnect the AC Adaptor...

Other models in this manual:
Cameras - DCR-DVD106E (5.5 mb)
Cameras - DCR-DVD108E (5.5 mb)
Cameras - DCR-DVD306E (5.5 mb)
Cameras - DCR-DVD308E (5.5 mb)

Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category