Votes - 4, Average rating: 4.3
(
)
)
|
Other manuals for this model:
manual abstract
9 Date/Time 11 Photo size English _25 preparation USING THE DISPLAY ( ) BUTTON Switching the information display mode You can switch between the on-screen information display modes: Slide the POWER switch downwards to turn on the power, and then press the Display ( ) button. Each press of the Display button toggles the OSD (On Screen Display) function on and off. • Full display mode: All information will appear. • Minimum display mode: Only operating status indicators will appear. If the DVD camcorder has warning information, a warning message will appear. USING THE JOYSTICK The Joystick is used to make a selection and to move the cursor left, right, up and down. Using the Joystick, you can easily make your selection and navigate the menu. 1. Move to a previous menu item / Adjust the selected item (to the left). 2. Move to a sub menu item / Adjust the selected item (to the right). 3. Move to a lower menu item. 4. Move to an upper menu item. 5. Press to select the chosen item (Select). 1 2 3 4 5 26_ English USING THE LCD SCREEN Adjusting the LCD screen 1. Open up the LCD screen 90° with your finger. 2. Rotate it to the best angle to record or play. Do not lift the DVD camcorder by holding the LCD screen. WARNING • Over-rotation may cause damage to the inside of the hinge that connects the LCD screen to the DVD camcorder. • See page 79 to adjust brightness and color of the LCD screen. USING THE VIEWFINDER You can view pictures through the viewfinder or see correct images when the picture on the LCD screen is poor. The viewfinder will work when the LCD screen is closed. Adjusting the focus The focus adjustment knob of the viewfinder enables individuals with vision problems to see clearer images. 1. Close the LCD screen. 2. Use the focus adjustment knob of the viewfinder to focus the picture. Viewing the sun or any strong light source through the viewfinder for a prolonged period may be harmful, or cause temporary impairment. English _27 preparation INITIAL SETTING: OSD LANGUAGE & DATE AND TIME • Initial setting is available in all operating modes. .page 21 • To read the menus or messages in your desired language, set the OSD language. To store the date and time during record, set the date/time. • Set the date and time when using this camcorder for the first time. .page 21 You can also set the date and time using the setting menu. .page 29 Selecting the OSD language You can select the desired language to display the menu screen and the messages. 1. Press the MENU button. • The menu will appear. 2. Move the Joystick right or left to select “Setting.” • The setting menu will appear. 3. Move the Joystick up or down to select “Language,” then press the Joystick. 4. Move the Joystick up or down to select the desired language, then press the Joystick. 5. To exit, press the MENU button. • Even if the battery pack or AC power were removed, the language setting would still be preserved. • “Language” options may be changed without prior notice. STBY 0:00:00 [30 min] STBY 0:00:00 [30 min] Setting 20% English On Transparency Language Demo Select STBY 0:00:00 [30 min] Setting Off 18 18 Date/Time Set Date/Time LCD Brightness LCD Color Select 28_ English Setting the date and time Set the date and time when using this DVD camcorder for the first time. The recording date/time is recorded on the movie/photo(SC-DX103/DX105 only) images. 1. Press the MENU button. • The menu will appear. 2. Move the Joystick right or left to select “Setting.” • The setting menu will appear. 3. Move the Joystick up or down to select “Date/Time Set,” then press the Joystick. • The month will be selected. 4. Move the Joystick right or left to the desired item(Month, Day, Year, Hour, Min AM/PM) and then move the Joystick up or down to set values. 5. To save the date and time, move the Joystick right or left to “Ok,” then press the Joystick. • To cancel the setting, move the Joystick to select “Cancel,” then press the Joystick. 6. To exit, press the MENU button. • If the button type battery is exhausted, the date and time will be reset as “JAN/01/2008 12:00 AM.” Replace with the button type battery for internal clock. .page 14 • You can set the year up to 2040. • The date and time do not appear during recording, but they are automatically recorded on the storage media, and can be displayed when you turn the date and time display on. STBY 0:00:00 [30 min] Setting Off 18 18 Date/Time Set Date/Time LCD Brightness LCD Color Select Date/Time Set Month Day Year Hour Min / 01 / 2008 12 00 AM Ok Cancel Turning the date and time display on/off To switch the date and time display on or off, access the menu and change the date/time mode. .page 79 English _29 DVD camcorder mode: before recording SELECTING THE STORAGE MEDIA (SC-DX103/ DX105 only) You can record movies onto a DVD disc, and you can record both movies and photos onto a memory card. With models SC-DX103/DX105, you must select the desired storage media before starting recording or playback. Selecting the...
Other models in this manual:Cameras - SC-DX100 (15.9 mb)
Cameras - SC-DX105 (15.9 mb)
Cameras - VP-D381 (15.9 mb)