Power Saving If the load is left at stable status, ("STB" as shown in Figure 4) for longer than 15 minutes, the screen will flash "–" to save power and will return to normal weighing readings when the load is changed. If the load is left at stable status for over 60 minutes, the scale will turn OFF automatically. -6-Model T10006 50 Kg Digital Crane Scale Overload Warning Remote Control If the load exceeds the maximum capacity Functions (net + tare weight), -OL- will be displayed on the screen. D

Press the button on the remote control to display the current zero value. Advance Tare Weight To input a known tare weight before weighing an item, press MR and the screen will display SHIFT. Press TARE, and the screen will display 000.00. To input the desired weight, scroll to the right by pressing the right arrow (TARE) button on the remote control until you come to the number that you would like to change. To increase the number from zero, press the left button ( ) button on the remote contro

Figure 2. Scale front view measurements. ............................................ 8 15.16" 6 1.32" 2 1.4" 16" 13 1.8" 1" Figure 3. Scale side view measurements. Tomaintainaccuracy,thescale should remain hanging and not be allowed to rest on the ground for a significant amount of time. ............ Like all tools there is potential danger when operating this tool. Accidents can be caused by lack of familiarity or failure to pay attention. If normal safety precautions are overlooked or ignored

Become familiar with this scale, its safety instructions, and its operation before beginning any work. Serious personal injury may result if safety or operational information is not understood or followed. SECTION 3: SET UP Unpacking Site Consideration Your crane scale was carefully packaged for safe shipping. If you discover any damage after you have signed for delivery, immediately call Customer Service at (570) 546-9663 for advice. Save the containers and all packing materials for possible in