Votes - 4, Average rating: 5
(
)
)
|
manual abstract
Specifications 2 . Installation 2.1 Front & Back View of Indicator 2.2 Keyboard Function 2.3 Connecting Loadcell to Indicator 3. Calibration 4. Operating Instructions 4.1 Starting and Starting auto zero setting at turning on 4.2 Manual Zero Setting (Semi-automatically setting zero ) 4.3 Tare Function 4.4 Connecting Scoreboard to Indicator 4.5 Connecting Pinter to Indicator 4.6 Connecting Serial Communication port to Indicator 4.7 Setting of Time and Date 4.8 Storing, Checking and Deleting of Data 4.9 insufficient voltage indication 5. Maintenance and Announcements 6. Errors and Information Important Notes!!! 1. Printer interface invalid due to the built-in micro-printer (optional supply upon special requirement) 2. The function key is used as the paper roll key, it works upon pressing and stops working upon releasing. 3. “5” should be chosen as printer parameter TypE 4. There is only one print format - linked bill format when micro-printer used. 5. The discount ratio printer option must be off while using: “odE=0” “dct=0” 1 Specification 1 Model XK3190-A1+ 2 Sample rated 5~25 times / sec 3 Load cell sensitivity 1~ 2mv/v 4 Division 1/2/5/10/20/50/100 optional 5 Display 7-bits LED digital display 0.56” in character height and 7 status indicating. 6 Clock can display day/month/year and second/minute/hour 7 Scoreboard display interface Using serial output method : current loop signal, transmission distance .50m RS323 signal, transmission distance .30m 8 Communication port RS-232C Baud rate: 600/1200/2400/4800/9600 optional 9 Printing Port Standard parallel output port, can connect with Tpup16 micro-printer, TM800,LX-300, KXP- 1121and LQ-1600k wide-line printer. 10 Power Supply AC 187~242V ; 49~50Hz The built-in repair-proof storage cell; 12V,7AH 11 Operating Temperature and Relative Humidity 0~40., . 90% RH 12 Storage /transportation Temperature -20 ~50. 13 Fuse 500mA 2. Installation 2.1 Front & Back View of the Indicator 1 ACCU 2 PRE-T 3 FUN TARE ENTER 4 CLEAR 5 CHECK 6 DATE 0 STORE 7 SET PRINT 8 CALB 9 TIME PRINT WEIGH ZERO (Graph 2-1) Front View of Indicator * ACCU - accumulating FUN- function CALB – Calibrating ( 25 ) pins (15 ) pins ( 9) pins Print output port RS-232C; Scoreboard output port Loadcell input port (Nameplate) Power source Fuse (Graph 2-2) Back View of the Indicator UNIT:KG MONEY PRICE AUTO DATE TIME TARE STABLE 2.2 Keyboard Function Key 1 [ACCU],[ UNIT PRICE] 2 3 [DELETE/4] 4 [CHECK/5] 5 [DATE/6] 6 [SET PRINT] 7 [CALB/8] 8 [TIME/9] 9 [STORE/0] 10 [ACCU/1],[ UNIT PRICE/3] 11 12 13 14 Function No meaning In calibration mode, pressing [PRE-TARE/2] , can input digital key “2”; In weighing mode, the key is used for presetting tare. In calibration mode, pressing [DELETE/4], can input digital key “4”; In weighing mode, it is deleting function key , more details shown in episode “deleting”. In calibration mode, pressing [CHECK/5], can input digital key “5”; In weighing mode, it is checking function key , more details shown in episode “checking”. In calibration mode, pressing [DATE/6] can input digital key “6” ;In weighing mode, it is date function key , more details shown in episode “setting of time and date”. In calibration mode, pressing [SET PRINT] can input digital key “7” ;In weighing mode, it is printing setup key , more details shown in episode “printing function”. In calibration mode, it is calibration function key ; In other operation modes it only inputs digital key “8” In calibration mode, pressing [TIME/9] can input digital key “9” ;In weighing mode, it is time function key , more details shown in episode “setting of time and date”. In calibration mode, pressing [STORE/0] can input digital key “0” ;In weighing mode, it is storing function key , more details shown in episode “storing data”. In calibration mode, pressing [ACCU/1] or [ UNIT PRICE/3] can input digital key, “1”; “3”;In weighing mode, there are no meaning. In weighing mode, when stable sign appears, press [TARE] key to clear tare. If indicator displays zero, the weight value is net weight. In weighing mode, when stable sign appeares, press [ZERO] key to clear limited weight on the platform. You can set zero range , generally the zero range is 4% of full scale. In weighing mode, when stable sign appears, press [PRINT] key to print weight data. In calibration mode, press [ENTER] key to confirm that parameters have been inputted and will enter to next parameter setting automatically. When indicator is in date, time, printing and communication setting mode, push [ENTER] key to confirm that parameters have been inputted. 15 In calibration or parameters setting mode, pressing [weigh], it will exit from original calibration or setting mode and return to weighing mode. 2.3 Connecting Loadcell to Indicator 1. The 9-pin socket is used for the link-up of loadcell, which has been clearly shown in the graph 2-3. 2. The 4-pin shielded cable is used, +S must be short connected with +E, -S and -E. The indicator does not have the function of lo...