Votes - 2, Average rating: 4
(
)
)
|
manual abstract
This option confirms that the antenna is in the best position to receive the satellite signal. 1. Press MENU. User’s Guide 2. Rotate the Encoder knob to highlight Antenna Aiming. The unit displays two 10-segment horizontal bar graphs with a minus (-) to the left and a plus (+) to the right. The SAT graph displays the satellite signal strength. The TER graph shows the terrestrial signal strength. Definition In urban areas where structures may affect the line of sight satellite signal, terrestrial repeaters (TER) strengthen the signal. They may not be available in your geographical location. Memory Options This option lets you control the automatic memory search function and clear all memory slots. Automatic Memory Search: turns automatic searching on and off. Use the Encoder knob to highlight ON or OFF and press the knob to make the selection. Clear all Memory: clears all favorite artist and song title combinations you previously stored. Press the Encoder knob. The unit prompts “Are you Sure?” Highlight YES or NO and press the Encoder knob. For more information about storing favorites in memory, see “Saving information about favorite songs” on page 14. SIRPNP Time Based Features The SIRIUS signal maintains the current time and can trigger pre-programmed alarms. Once you turn the power on and the unit receives the satellite signal, the unit automatically maintains the time unless you remove it from its docking base. If the receiver loses the signal, it loses the time and will not trigger any pre-programmed alarms. To restore the time and alarms, turn the receiver on. It will update the time automatically from the satellite signal. Clock This option sets the time on the clock that appears on the default display based on your chosen format, the time zone, and daylight savings time. Format: determines the style of display: 12 Hour (default) or 24 Hour. Time Zone: selects the time zone based on Greenwich Mean Time (GMT). DST (Daylight Savings Time): indicates whether daylight savings time is observed in your current location or not. Your settings are: DST Observed or DST Not Observed. Alarm Clock This option turns the Plug and Play receiver on at a specific time. Press any button on the front panel. When the unit turns on it plays the stream you selected last. Set Alarm: provides the settings: Alarm On or Alarm Off (default). When the alarm is on, the time appears on the default display in reverse image. Alarm time: sets the alarm time. Press the Category buttons to increase or decrease User’s Guide the hours. AM and PM switch automatically. Turn the Encoder knob to set the minutes. Clockwise increases the minutes and counterclockwise decreases them. Press the Encoder knob to accept the selected time (or press Menu to cancel). Program Alert This feature allows you to program the unit to switch to a specific stream at a specific time. The top line of the display shows: Set Program Alert. Program Time/Day: selects the time and the day. The default is 12:00 PM Monday. With Time highlighted, press the Category buttons to increase or decrease the hours. AM and PM switch automatically. Turn the Encoder knob to set the minutes. Clockwise increases the minutes and counterclockwise decreases them. Press the Encoder knob to accept the selected time. With Day highlighted, the unit displays the days of the week (default: Monday). Use the Encoder knob to select the day. Stream: displays the list of streams. Use the Encoder knob to select the stream to associate with the selected time. Program Alert On/Off: turns the Program Alert function on and off. Your settings are: Program Alert On or Program Alert Off. Auto Shutdown You can configure the Plug and Play receiver to automatically shut off after one hour. This is especially useful if the Plug and Play receiver is running on battery power, such as in your car. SIRPNP After running for 59 minutes of inactivity, the unit displays: Cancel Auto Shutdown. If you’re near the unit and wish it to continue, press the Encoder knob to cancel shutdown. Your settings are: Enabled, Disabled (default). Rotate the Encoder knob to highlight the setting and press the knob to select the highlighted setting. Sleep mode This option lets you configure the Plug and Play receiver to shut down after a number of minutes. Sleep Off: is the factory default. 15, 30, 45 and 60 minute: intervals are your settings. Rotate the Encoder knob to highlight a setting and press the knob to select it. Factory Default This option restores all configuration options to their factory defaults. The settings are: YES and NO. The following are the factory defaults: • All memory presets revert to empty • Auto Dimming: ON • Display Contrast: 50% • FM Transmitter: ON • FM Frequency: 88.9 MHz • Audio Output Level: 50% • Access to all skipped streams (locked streams remain locked) • Memory Search: ON • Memory Locations: erased • Clock Format: 12 Hour User’s Guide • Time Zone: Eastern • Daylight Savings Time: Observed • Alarm: ...
Other models in this manual:Receivers & Amplifiers - RPNP Plug and Play Receiver (980.94 kb)
Receivers & Amplifiers - RPNP Plug and Play Receiver (980.94 kb)