Login:
Sorted: Name ↑   Downloads   Rate   Size ↑  
downloaded: 0   File size: 621 kb   Manafacture: Emerson  
Category: Fans
@name

(‘'Coleman") warrants that for a period of one (1) year from the date of purchase, this product will be free from defects in material and workmanship. Coleman, at its option, will repair or replace this product or any component of the product found to be defective during the warranty period. Replacement will be made with a new or remanufactured product or component. It the product is no longer available, replacement may be made with a similar product of equal or greater value. No warranty is pro

downloaded: 2   File size: 208 kb   Manafacture: Emerson  
Category: Fans
@name@name

ACCESSOIRES (NON INCLUS) Item No. 2000000251. 2. Battery Clips, allow operation of your cooler from any 12 Volt battery where a cigarette- lighter receptacle is not available. Item No. 5999-012 1. Bloc d’alimentation 120 volts c.a./ 12 volts c.c. - permet de faire marcher la glaciere a la maison ou dans tout endroit a l’abri des intemperies, quand le courant alternatif y est disponible. Article 2000000251 2. Pinces de batterie - pour faire fonctionner la glaciere sur batterie de 12 volts quand u

downloaded: 0   File size: 203 kb   Manafacture: Emerson  
Category: Fans
@name

. #8 Washerhead, (4) — — — — — — — — — — — 29 Washer, 9/16” — — — — — — — — — — — — Owner's Manual BP7234-3 BP7234-3 BP7234-3 BP7234-3 BP7234-3 BP7234-3 BP7234-3 BP7234-3 BP7234-3 BP7234-3 BP7234-3 *Contact your nearest ! WARNING: FOR YOUR OWN SAFETY TURN OFF POWER AT FUSE BOX OR CIRCUIT BREAKER BEFORE TROUBLE SHOOTING YOUR FAN. Trouble Shooting TROUBLE PROBABLE CAUSE SUGGESTED REMEDY 1. Fan will not start. 1. Fuse or circuit breaker blown. 2. Loose power line connections to the fan, or loose sw

downloaded: 3   File size: 203 kb   Manafacture: Emerson  
Category: Fans
@name

8 Attaching Light Kit WARNING ! To avoid possible electrical shock, be sure electricity is turned off at the main fuse box before wiring. To install an accessory light kit, remove the three screws securing the switch cup assembly to the fan, remove the switch cup assembly, and disconnect the connector. Remove the screw plug from the bottom of the switch cup and install the light kit in accordance with the light kit Owner's Manual. Maintenance IMPORTANT CARE INSTRUCTIONS for your Ceiling Fan Peri

downloaded: 1   File size: 203 kb   Manafacture: Emerson  
Category: Fans
@name

Additionally, this warranty and any implied warranty of merchantability or fitness for a particular purpose are voided when: • The original purchaser or user ceases to own the product, or • The fan is moved from its original point of installation. This warranty is only valid within the 50 states of the United States and the District of Columbia. No other written or oral warranties apply, and no employee, agent, dealer or other person is authorized to give any warranties on behalf of Emerson Comp

downloaded: 1   File size: 203 kb   Manafacture: Emerson  
Category: Fans
@name

Figure 4 NOTE: If you are using an Emerson Light Fixture with your fan, see Light Fixture Owner’s Manual for wiring. 2. Securely connect the fan motor white wire to the supply white (neutral) wire using wire connector supplied (Figure 4). Securely connect the fan motor black wire and blue wire to the supply black (hot) wire using wire connector supplied (Figure 4). After connections have been made, turn leads upward and carefully push leads into the outlet box, with the white and green leads on

downloaded: 5   File size: 203 kb   Manafacture: Emerson  
Category: Fans
@name

half of styrofoam unit. Remove parts and check to see that you have received the following: a. Fan motor and housing assembly b. One motor cover c. One ceiling cover d. Five blade flanges e. One hanger ball/downrod assembly f. One hanger bracket g. One housing switch cup h. One loose parts bag containing: 1. One setscrew 2. One 3/16" hex wrench 3. Eleven 10-32 x 5/8" oval head screws 4. Two 1” threaded studs 5. Two 1-1/4” threaded studs 6. Four knurled knobs 7. Three wire connectors 8. Four 8-32

downloaded: 5   File size: 203 kb   Manafacture: Emerson  
Category: Fans
@name

Engage the connector of the switch cup assembly with the motor connector by aligning the V-notch shaped keyways and pressing the connectors firmly together until they fully mate. The V-notch keyways prevent the connectors from being engaged improperly. 14. Position the switch cup assembly on the motor switch plate and align the holes in the cup assembly with the holes around the side of the switch cup plate. Secure The switch cup assembly by installing three 8-32 x 3/8" flat head screws (supplie

downloaded: 0   File size: 335 kb   Manafacture: Emerson  
Category: Fans
@name

Turn the switch housing cover clockwise to engage the slots, then securely tighten the two screws (Figure 13). NOTE: Be sure the wires are not pinched between the switch housing and the switch housing cover. 6 FAN BLADE 6-32 x 6mm PHILLIPS BUTTON HEAD SCREWS (2) STRUT Figure 10 SWITCH HOUSING COVER REMOVE AND RETAIN THIS NUT REMOVE AND RETAIN THIS LOCKWASHER Figure 12 LIGHT FIXTURE SWITCH HOUSING COVER 2-1/4" PIPE NIPPLE TIGHTEN TWO 8-32 x 3/8" PAN HEAD SCREWS REINSTALL LOCKWASHER AND NUT SPEED

downloaded: 1   File size: 335 kb   Manafacture: Emerson  
Category: Fans
@name

Carefully lift the fan and seat the hanger ball/downrod assembly on the hanger bracket that was just attached to the outlet box (Figure 19). Be sure the groove in the ball is lined up with the tab on the hanger bracket (Figure 18). Failure to seat tab in groove could cause damage to electrical wires and possible shock or fire hazard. WARNING ! NOTE: CEILING COVER, SUPPLY WIRES AND FAN WIRES OMITTED FOR CLARITY. Figure 19 ASSEMBLY WARNING ! To avoid possible fire or shock, do not pinch wires betw





Category