Login:
Sorted: Name ↓   Downloads   Rate   Size ↑  
downloaded: 5   File size: 789 kb   Manafacture: Emerson  
Category: Fans

downloaded: 4   File size: 789 kb   Manafacture: Emerson  
Category: Fans

downloaded: 0   File size: 58 kb   Manafacture: Emerson  
Category: Fans
@name

You must be the original purchaser or user of the product to be covered. What The Period Of Coverage Is: All components are covered by this warranty for one year from the date you purchased your light fixture. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, MADE WITH RESPECT TO COMPONENTS AND ACCESSORIES IS ALSO LIMITED TO ONE YEAR. What Will Emerson Electric Co. Do To Correct Problems: Emerson Electric Co. will replace a defective Emerson Light Fixture at no charge

downloaded: 0   File size: 380 kb   Manafacture: Emerson  
Category: Fans
@name

CF2650BC01 CF2650WB01 CF2650PW01 RAPHAEL™ / RAPHAEL II™ ® Net Weight: 29.5 Lbs. Ceiling Fan Owner's Manual LIMITED WARRANTY What The Warranty Covers: This warranty covers the motor and the other components and accessories of your Emerson ceiling fan against all defects in workmanship and materials. You must be the original purchaser or user of the product to be covered. What The Period Of Coverage Is: As it applies to the motor, this warranty will last for a lifetime from the date you purchased

downloaded: 7   File size: 330 kb   Manafacture: Emerson  
Category: Fans
@name

2.Remove the hanger ball from the downrod by loosening the setscrew in the hanger ball until the ball falls freely down the downrod (Figure 1). Remove the pin from the downrod, then remove the hanger ball. Retain the pin and hanger ball for reinstallation in step 9. HANGER BALL DOWNROD PIN SETSCREW Figure 1 3. Separate, untwist and unkink the three motor leads. Route the motor leads through the downrod and seat the downrod in the motor coupling (Figure 2). NOTE: If your ceiling height is nine fe

downloaded: 4   File size: 330 kb   Manafacture: Emerson  
Category: Fans
@name

6 NOTE: CEILING COVER, SUPPLY WIRES AND OUTLET FAN WIRES OMITTED BOX FOR CLARITY. HANGER BRACKET Figure 14 DOWNROD ASSEMBLY HANGER BALL/ WARNING ! To avoid possible fire or shock, do not pinch wires between the hanger ball/downrod assembly and the hanger bracket. How to Wire Your Ceiling Fan If you feel that you do not have enough electrical wiring knowledge or experience, have your fan installed by a licensed electrician. 1. Connect the green grounding lead from the hanger ball and the green gr

downloaded: 2   File size: 330 kb   Manafacture: Emerson  
Category: Fans
@name

If flanges are seated incorrectly, loosen the flange screws and retighten according to step 13 in the section “Assembly Instructions”. 5. Tighten the hanger bracket screws to the outlet box, and/or secure outlet box. 6. Interchanging an adjacent (side-by-side) blade pair can redistribute the weight and result in smoother operation. Or use supplied balancing kit to balance blades. 9 10 8 33 24 12 36 10 35 5 4 25 26 15 18 19 9 21 23 24 11 40 7 38 28 29 31 30 32 22 14 13 37 39 34 1 2 16 17 3 18 6 2

downloaded: 2   File size: 205 kb   Manafacture: Emerson  
Category: Fans
@name

5 How to Wire Your Ceiling Fan If you feel that you do not have enough electrical wiring knowledge or experience, have your fan installed by a licensed electrician. WARNING ! To avoid possible electrical shock, be sure electricity is turned off at the main fuse box before wiring. NOTE: If you are not sure if the outlet box is ground- ed, contact a licensed electrician for advice, as it must be grounded for safe operation. 1. Connect the green grounding lead from the hanger ball and the green gro

downloaded: 1   File size: 205 kb   Manafacture: Emerson  
Category: Fans
@name

Use the National Electrical Code if Local Codes do not exist. The ceiling fan must be grounded as a precaution against possible electrical shock. Electrical installation should be made or approved by a licensed electrician. 3. The outlet box and joist must be securely mounted and capable of reliably supporting at least 50 pounds. Use only U.L. outlet boxes listed as acceptable for fan support, and use the mounting screws provided with the outlet box. Most outlet boxes commonly used for support o

downloaded: 5   File size: 205 kb   Manafacture: Emerson  
Category: Fans
@name

Up to 50 ft. 14 One Phillips head screwdriver One stepladder 50-100 ft. 12 Five wire connectors (supplied) One wire stripper MATERIALS Wiring outlet box and box connectors must be of type required by the local code. The minimum wire would be a 3-conductor (2-wire with ground) of the following size: WARNING ! Before assembling your ceiling fan, refer to section on proper method of wiring your fan (page 6). If you feel you do not have enough wiring knowledge or experience, have your fan installed





Category