Applying pressure, insert bottom pipe into the center opening of the base. On base underside, insert locking pin into bottom pipe hole (Fig.2). Using a Phillips screwdriver, slide locking pin over screw post and secure with screw provided. 2. Align top pipe to the connector indentation points on the bottom pipe. Place top pipe onto the connector. Turn top pipe to the left (from position 0 to position 1) to secure (Fig. 3). 3. Slide the fan housing neck connector down over the top pipe. Make sure

Grille Screw Tornillo para la parrilla Vis de la grille 2. Front Grille Parrilla frontal Grille avant 3. Blade Cap Tapa Capuchon des pales 4. Fan Blade Paleta Pales 5. Plastic Collar Anillo de plastico Collier en plastique 6. Rear Grille Parrilla trasera Grille arriere 7. Motor Shaft Eje del motor Arbre du moteur 8. Shaft Pin Clavija del eje Pignon du moteur 9. Oscillating Knob Perilla para oscilacion Bouton d’oscillation 10. Speed Control Switch Interruptor para el Control de Velocidad Commande

CARE AND CLEANING This appliance requires little maintenance and contains service personnel if servicing is needed. This fan is permanently lubricated and will not TO CLEAN: Before cleaning, turn fan off and unplug from ensure adequate air circulation to the motor, keep vents located at the rear of the motor cleaner hose can be used to clean these blade (Fig. 1). Grilles and blade may Use a soft, slightly damp cloth to wipe fan parts. Do not allow water or any have dried completely. Do not plug