Votes - 4, Average rating: 4.3 ( )

Manafacture: Air King File size: 574.54 kb File name: 219500EN.pdf Language of manual:

610899004) (from our range of special accessories). Abluft = Exhaust air Zuluft = Supply air The dimensions and position of the air outlet opening are given in the following diagram. Draufsicht = Plan Preparing the wall box (exhaust air operation) Position of exhaust air opening Special accessories Exhaust air hoses Preparing for return air operation For wall box/fume extractor hood connection, it is best to use the non-flammable exhaust air hose under E-No. 610899008 (125 mm dia.) from our range of special accessories. The fume extractor hood is used as a return air hood when no ventilation shaft or outer wall is available. For operation as a return air hood, it is necessary to install 2 active carbon filters KL600 (E-No. 610899470) for kitchen fume absorption. Active carbon filters KL600 are supplied as special accessories (for your own account). To insert the 2 carbon filters, proceed as follows: 1. Remove metal fat filter grille (Fig. ES/D) (press outwards by unlocking the locking bolts) (Fig. EW). 2. Remove both knurled screws on the motor shaft (by turning to the left), place one active carbon filter (round) on each motor and screw the knurled screws into the motor shafts. 3. Re-insert (re-engage) metal fat filter grille. The fume extractor hood is now ready for return air operation. 34 ALS3 5/90 - VOU1A 5/90 GB/EU If the kitchen fume is discharged into the open air through the outer wall, you need a telescopic wall box (E-No. 610899004) (for your own account from our range of special accessories) (Fig. CJ). See the following illustration for the dimensions and position of the air outlet opening. To connect the wall box/fume extractor hood, you are recommended to use the 125 mm dia. non-flammable exhaust air hose (E-No. 610899088) (for your own account from our range of special accessories). The exhaust air connection has a theoretical opening of 125 mm dia. Exhaust air discharged upwards or backwards: The exhaust air can be discharged through the available moving hose (accessory) with a sleeve inside the chimney cover plate (Fig. EO/2) upwards or directly backwards (wall box). Preparing for exhaust air operation 35 Wall Installation steps for exhaust air operation mounting 1. Hold the installation template (with readable lettering) on the wall, noting the distance between the upper edge of the hob and the lower edge of the fume extractor hood! (Electric/gas cookers 650 mm) (oil and coal cookers min. 700 mm). 2. Mark out and drill the 8 mm dia. holes. Insert the wall plugs and mount the wall rail (Fig. EO/3). The wall rail can be horizontally aligned by shifting the sliding elements. Important! Only use the supplied 5 x 60 mm screws to DIN 7996! 3. Mount the fume extractor hood In the wall rail and centrally align about the cooker hob. 4. Insert the chimney retaining plate (Fig. EO/4) in the fume extractor hood (cutout for exhaust air hose) so that both angles (above) face forwards (Fig. EO/4). Fix the chimne...

Download now

Please, enter two numbers from picture: