In the event of malfunction, first check your household fuses. If the power supply is in proper working order, but the appliance is still not functioning, please inform your specialist dealer or your nearest Gaggenau after-sales service. 2. Features Features VC 421 Features VC 422 1 2 3 4 5 1 2 3 4 5 1 SuperQuick cooking zone O 180 mm (1800 W) 2 SuperQuick cooking zone O 180 mm (1800 W) cooking zones 1 and 2 plus additional zone 800 W convert to oval roasting zone 180 x 415 mm (4400 W) 3 Display panel with indicator light and residual heat display 4 Control knob for front cooking zone 5 Control knob for rear cooking zone 1 SuperQuick cooking zone O 140 mm (1100 W), converts to roasting zone 140 x 240 mm (2000 W) 2 SuperQuick cooking zone O 180 mm (1500 W), converts to O 230 mm (2400 W) 3 Display panel with indicator light and residual heat display 4 Control knob for front cooking zone 5 Control knob for rear cooking zone Special accessories You can order the following special accessory: VV 400-000 Connecting trim VZ 400-000 Connecting trim with timer VD 400-000 Appliance cover BT 481-000 only for VC 421: Cast aluminium, non-stick coated roaster with lid, suitable for the roasting zone Visual signals Luminous disc Indicator behind the on the control knob cooker lights OFF light constantly slow flashing of indicator light (long OFF, short ON) fast flashing of a luminous disc fast flashing of both control knobs fast flashing of both luminous discs alternately Signification cooking zone ON residual heat display holiday safeguard power cut faulty installation Cause / Remedy appliance is switched OFF normal use The appliance is too hot to be touched safely. The appliance setting has not been changed for over 4 hours. T urn control knobs to 0 and then switch on again if required. After a power cut, the appliance stays switched off for safety reasons. T urn control knobs to 0 and then switch on again if required. Connecting cable between the appliance and the control panel is not plugged in. Check that cable is plugged in firmly. 7 Switching on Press down the control knob for the corresponding cooking position and turn it left or right to the required position (1 -12). The luminous disc behind the control knob and the corresponding indicator light on the display panel light up, as long as the corresponding cooking zone is switched on. The cooking zones are electronically controlled during use, in order to maintain a constant heat, the cooking zone switches on and off intermittently. Switching off Fully turn the control knob to the OFF position. The luminous disc goes off. Indicator light / Residual heat display The corresponding indicator light on the display panel lights, as long as the corresponding cooking zone is switched on. After switching off the cooking zone the corresponding indicator light will flash, as long as the cooking zone has not cooled down sufficiently to be touched safely. Switching on Switching off 3. Operation VC 421 Indicator light...

Other models in this manual:
Cooktops - VC421110/02 (836.89 kb)
Cooktops - VC421110/10 (836.89 kb)
Cooktops - VC421110/11 (836.89 kb)
Cooktops - VC422110/01 (836.89 kb)