Login:
Votes - 0, Average rating: 0 ( )

User manual Bosch, model EI601TB11/02

Manafacture: Bosch
File size: 2.01 mb
File name:
Language of manual:en
Free link for this manual available at the bottom of the page



Other manuals for this model:

manual abstract


The range must be turned off. To turn on: press and hold the @ symbol for approx. 4 seconds. The @ indicator lights up for 10 seconds. The range is locked. To turn off: press and hold the @ symbol for approx. 4 seconds. The lock is now deactivated. The hob is locked If a hotplate is programmed with the hob locked, the following will occur: ¦ On the hotplate's indicator, ‹ will flash or the residual heat indicator will flash alternately with ‹ . ¦ The indicator light over the symbol @ will come on. Switch off the hotplate. Switch off the lock. Activating and deactivating the childprooflock With this function, the childproof lock automatically activates when a hob is switched off. Activating and deactivating See the “Basic Settings" section. The Powerboost Function The Powerboost function can be used to heat food more quickly than using the power level S. Use limitations This function may be used for all hotplates, provided that the other hotplate in the same group is not switched on ( see figure). Otherwise, › and the power level will flash on the selected hotplate display; the previously selected power level will then be automatically set, without turning on the function. % % . % . % . To activate 1. Select the desired power level. 2. Press the › symbol which controls the selected hotplate. The › indicator lights up. The function has been turned on. To desactivate Press the › symbol. The › symbol switches off. The Powerboost function has been deactivated. Note: In certain circumstances, the Powerboost function may turn off automatically in order to protect the electronic components inside the hob. Time programming function This function may be used in two different ways: ¦ to automatically switch off a hotplate. ¦ as a timer. Turning off a hotplate automatically Enter the time period for the hotplate. The hotplate turns off automatically once the time has elapsed. How to program 1. Select the required hotplate and power level. 2. Press the 0 symbol several times until the required hotplate is selected. The ‹‹ indicator lights up in the time program function display. The x indicator lights up on the hotplate. 3. Press the + or - symbol on the time program function. The basic settings are displayed. Symbol + 30 minutes Symbol - 10 minutes 4. Set the required time using the + or - symbol. After a few seconds, the timer will start to count down. The last programmed cooking time will appear in the display. Once the time has elapsed The cooking zone switches off once this time has elapsed. A warning beep sounds. ‹ appears on the hotplate and ‹‹ appears on the time program function display. Pressing the 0 symbol turns off the indicators and stops the beep. Turn the control to the 0 setting. Correct or cancel the time Press the symbol 0 several times until the x indicator for the required hotplate lights up with greater intensity. Change the cooking time or set to ‹ with the symbols + or - . Note: Any cooking time can be programmed up to 99 minutes. Automatic timer With this function you may select a cooking time for all hotplates. Once a hotplate is switched on, the selected time will begin to count down. The hotplate will automatically switch off when the cooking time has elapsed. Instructions on activating the timer are found in the chapter entitled " Basic settings" . Note: The cooking time of a zone may be cancelled or changed: Press the 0 symbol several times until the required x indicator lights up. Change the cooking time using the + or symbols, or set to ‹‹ . The timer The timer can be set for periods of up to 99 minutes. It is independent of the other settings. This function does not automatically switch off a hotplate. How to program 1. Press the 0 symbol several times until the W indicator lights up. ‹‹ appears in the time program function display. 2. Press the + or - symbol on the time program function. The basic setting will appear. + symbol: 10 minutes. - symbol: 05 minutes. 3. Set the time required using the + or -...

Other models in this manual:
Cooktops - EI601TB11/20 (2.01 mb)
Cooktops - EI675TB11E/02 (2.01 mb)
Cooktops - EI675TB11E/20 (2.01 mb)
Cooktops - EI875TB11E/02 (2.01 mb)

Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category