Cords rated for less amperage may overheat. Care should be taken to arrange the cord so that it cannot be pulled or tripped over. SAVE THESE INSTRUCTIONS. POLARIZED This appliance reduce the risk one way. If the plug does not fit, contact in any way. TAMPER-RESISTANT SCREW Warning: This appliance is equipped with removal of the outer cover. To reduce do not attempt to remove the outer cover. There are no user-serviceable parts inside. Repair should be done only by authorized service personnel. N

If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way. TAMPER-RESISTANT SCREW Warning : This appliance is equipped with a tamper-resistant screw to prevent removal of the outer cover. To reduce the risk of fire or electric shock, do not attempt to remove the outer cover. There are no user-serviceable parts inside. Repair should be done only by authorized service personnel. Note: If

Note: If the power supply cord is damaged, it should be replaced by qualified personnel in Latin America by an authorized service center. Product may vary slightly from what is illustrated. MAX AUTO CLEAN 124567891112310 Symbols Surge-of-Steam Spray 1. Spray nozzle 2. Water-fill cover 3. Digital display window Dry 4. Surge-of-steam button 5. Spray button 6. Comfort Grip™ handle 7. 360-degree swivel cord 8. Smart stand/cord wrap 9. AUTO CLEAN® button 10. Water window with MAX mark 11. Fabric-sele

Note: If the power supply cord is damaged, it should be replaced by qualified personnel or in Latin America by an authorized service center. Garantie limitee de un an (Valable seulement aux Etats-Unis et au Canada) Por favor llame al numero correspondiente que aparece en la lista a continuacion para solicitar que se haga efectiva la garantia y donde Ud. puede Quelle est la couverture? solicitar servicio, reparaciones o partes en el pais donde el producto fue comprado. • Tout defaut de main-d’oeu

STORING YOUR IRON 1. Unplug the iron and allow it to cool. 2. Check that the selector is set to min. 3. Wrap the cord loosely around the heel rest and tuck in the plug to secure it. 4. Store vertically on its heel rest to prevent water leaking from the soleplate. Utilisation L’appareil peut seulement servir pour une utilisation domestique. PREPARATIFS Enlever tout collant ou etiquette du corps ou de la semelle du fer. Important : Afin de pouvoir en verifier la garantie, ne pas retirer l’etiquett

The temperature setting number will continue to be displayed in the lighted area . 6. To change temperature settings while ironing, just push the temperature button. When a lower setting is selected, a "down" arrow will flash until the iron temperature has lowered to the correct level for that setting. 7. About the Auto Off: When the iron is idle for 10 minutes, the iron will beep one tone, the digital display will flash "Auto Off" and the iron will turn off. B C D E 1. Spray nozzle 2. W

. If an extension cord is absolutely necessary, a 15-amperes and 120-volt, or 7-ampere and 220-volt cord should be used. Cords rated for less amperage may overheat. Care should be taken to arrange the cord so that it cannot be pulled or tripped over. SAVE THESE INSTRUCTIONS. Soft-Touch Parts Note: The soft-touch parts of this unit are free of natural rubber and latex. They are safe for individuals allergic or sensitive to these materials. POLARIZED PLUG (120V Models Only) This appliance has a po

Tank 2 is for use with Downy Releaser® liquid for spray_require distilled or treated water ) GETTING STARTED Important: For warranty verification, do not remove Remove any labels, stickers or tags attached ordinary tap water for ironing. Do not use system. Important: For optimum performance, let the iron stand for to iron. FOR STEAM IRONING Filling Tank 1 with Water A B C D E 1. Open the water-fill cover (A). 2. Tilt the iron and using a clean measuring cup, pour water into opening until the wat

To reduce the risk of fire or electric shock, do not attempt to remove the outer cover. There are no user-serviceable parts inside. Repair should be done only by authorized service personnel. Note: If the power supply cord is damaged, it should be replaced by qualified personnel. In Latin America, by an authorized service center. 9 10 Product may vary slightly from what is illustrated. 1. Spray nozzle 2. Water-fill cover 3. Fabric-select dial 4. Steam button 5. Spray button 6. On indicator light

Once the iron reaches the selected temperature, it beeps and displays READY (C) . 3-Way Automatic Shutoff The automatic shutoff feature in your iron works as follows: • Once the iron reaches appropriate temperature, it after 30 seconds of inactivity if left on its soleplate on its side. If left vertically on its heel rest, it minutes (D) . • The unit beeps three times and AUTO display window to let you know the (E) . • After a few minutes, the digital • If you pick up the iron, it activates dete