Votes - 3, Average rating: 4.7
(
)
)
|
manual abstract
Tank 2 is for use with Downy Releaser® liquid for spray_require distilled or treated water ) GETTING STARTED Important: For warranty verification, do not remove Remove any labels, stickers or tags attached ordinary tap water for ironing. Do not use system. Important: For optimum performance, let the iron stand for to iron. FOR STEAM IRONING Filling Tank 1 with Water A B C D E 1. Open the water-fill cover (A). 2. Tilt the iron and using a clean measuring cup, pour water into opening until the water reaches the MAX level mark on the water tank (B). Do not overfill. Important: • Do not pour any Downy Wrinkle Releaser® liquid, into Tank 1 as it will damage your iron and potentially stain your clothes once the fluid is heated. • If you accidentally pour this liquid into Tank 1, empty the tank (refer to Empting Water Tank instructions) then refill the tank with regular water. • Use the self-cleaning feature; see Self-Cleaning instructions. 3. Close the water-fill cover. 4. Plug in the iron. The temperature-ready light glows green (C). Tip: If unsure of a garment’s fiber, test a small area (on an inside seam or hem) before ironing. 5. Move the selector to the desired steam level (D). 6. Turn the fabric-select dial to appropriate setting (between 4 and 6) for your fabric (E). See fabric guide on the heel rest and read garment’s label to help you determine fabric type. • The temperature-ready light glows green until it reaches the appropriate temperature. • It then glows on and off during ironing. This is normal. 7. When finished ironing, turn the fabric-select dial to lowest heat setting, move the dry/steam selector to and unplug the iron. FOR DRY IRONING Make sure selector is set to . If you want to empty the water, see instructions under “Emptying Tank 1 after Ironing – Optional”. 1. Turn the fabric-select dial to the appropriate setting for your fabric. See fabric guide on the heel rest and read garment’s label to help you determine fabric type. • The temperature-ready light glows green until it reaches the appropriate temperature. • It then glows on and off during ironing. This is normal. 1. Spray nozzle 2. Tank 1 for water only 3. Tank 1 water-fill cover 4. Dry/steam and self-cleaning selector 5. Dual tank spray button Self-cleaning Dry Steam for use with Tank 1 Spray for use with Tank 2 Symbols 6. Surge-of-steam button 7. Temperature-ready and auto shutoff light 8. Comfort Grip™ handle 9. 360° pivoting cord 10. Heel rest 11. Fabric guide 12. Fabric-select dial 13. Tank 2 for Downy Wrinkle Releaser® liquid or water 14. Tank 2 Downy Wrinkle Releaser® liquid or water-fill cap 15. Soleplate 3 3. When finished, unplug the iron and place it on its heel rest. 4 MULTI-POSITION AUTO OFF If your iron is equipped with auto shutoff: • Once it reaches appropriate temperature, it will turn off after 30 seconds of inactivity if left horizontally, or 8 minutes if left in any other position (F). • The auto shutoff light starts blinking red to let you know that the iron has stopped heating. • As soon as you pickup the iron, it starts heating again. SURGE OF STEAM • Horizontal 1. With Tank 1 filled with water to the MAX mark, turn the fabric-select dial to at least setting 4 and wait for the temperature-ready light to go off. 2. To remove tough wrinkles, pump the button at 5-second intervals for a concentrated blast of steam. • Vertical 1. Hang the garment to be steamed on a clothes hanger (Curtains or drapes can be steamed once they are hung). 2. Move the selector to . 3. Hold the iron close to, but not touching, the fabric. 4. Pull the fabric tight in your free hand and pump the button as you move the iron over the fabric (G). IRONING WITH SPRAY (TANK 2) Using Downy Wrinkle Releaser® Liquid 1. Grasp tank fill cap, twist and pull off. Be careful not to pull it too hard (H). 2. Pour Downy Wrinkle Releaser® liquid into opening to fill tank (J). 3. Press button to apply to fabric as you iron. 4. If spray is weak, pump the button a few times. Using Water Only Important: For best results, do not mix tap water with Downy Wrinkle Releaser® liquid. 1. Repeat step 1 above. 2. Using a clean cup, fill Tank 2 with water (K). 3. Press button to spray water as you iron. 4. If spray is weak, pump the button a few times EMPTYING TANK 1 AFTER IRONING (OPTIONAL) 1. Turn the fabric-select dial to Min. Unplug the iron and let it cool. 2. Open the water-fill cover. 5 6 G H J 3. Empty the water by holding the iron over a sink with the tip pointing down. Water will empty out of water-fill opening (L). Care and Cleaning This product contains no user serviceable parts. Refer service to qualified service personnel. CLEANING OUTSIDE SURFACES 1. Make sure iron is unplugged and has cooled completely. 2. Wipe the soleplate and outer surfaces with a soft cloth dampened with water and a mild household detergent. Never use abrasives, heavy-duty cleansers, vinegar or scouring pads that may scratch or discolor the iron. 3. After cleaning, steam iron over an old...