Votes - 4, Average rating: 4
(
)
)
|
manual abstract
• Open the filler opening for the water reservoir . • Fill the reservoir with tap water using the measuring cup , at most to the "MAX" marking. • Close the water reservoir filler opening , making sure it "clicks" shut. Plugging In and Ironing Dry ironing without steam is possible at all temperatures, steam ironing is only possible from setting 2 (••). • Plug the power plug into a power socket of 230 V~/50 Hz. Important! Should the care instructions for an article of clothing not mention ironing, (Symbol ), you should not iron that clothing article. You could otherwise cause damage to the clothing article. • Check the care instructions on the labels of the clothing article whether and at which temperature the clothing article may be ironed. • Set the appropriate temperature setting with the temperature control . The control light for the temperature lights up. When the control light goes out, the chosen temperature has been reached. • Wait until the temperature control light goes out. • To moisten the material, press the button for the water fog . This function is suitable for very dry, crumpled or creased materials. Steam Ironing • Set the steam control to the desired steam strength setting. Ironing with Steam Spray The steam spray is especially suited to smoothing places in the laundry that are difficult to access. • Raise the steam iron a little way. • Press the steam spray button to release the steam spray . Setting the Steam Iron Temporarily Aside Fire Hazard! Never leave the steam iron unattended when it is hot or switched on. • Set the temperature control to the position "MIN“. • Only put the steam iron down on its standing foot , fig. 2. . - 6 KH 1281 Putting the Steam Iron Away After Use • Remove the power plug from the power socket. • Empty the water reservoir and clean the gliding sole . • Place the cool steam iron horizontally on a soft, clean base. Drip-Stop Function In conventional steam irons, it is possible that at too low ironing temperature water begins to trickle from the base of the iron. However, this iron possesses a new technical feature, namely the DRIP-STOP function, to switch off steam. The iron automatically switches off the steam ejection at low temperatures. A “CLICK” noise is heard when this happens. Using the temperature rotary controller , set the required temperature. Steam generation will continue as soon as this temperature level is reached. Cleaning Self-cleaning function • Fill the water container up to the marking MAX. • Insert the plug into the power socket. • Set the temperature regulator to the position MAX. • Let the iron warm up till the control light cuts off and lights up again. • Hold the iron horizontally over a trap vessel. • Set the steam regulator to Self- Clean position and hold it in this position. Now steam and boiling water will start emerging from the steam escape holes at the base of the iron. Any dirt, if present, will get washed out. • Release the steam regulator as soon as the water in the water container is used up. • To ensure that no water remains in the steam chamber, dry the base of the iron thoroughly. For this purpose, wipe the base of the iron a few times on a towel or an old cloth. • Allow the iron to cool down before storing it away. ..Note: The effect of the self-cleaning function can diminish after extended usage of the iron. We therefore recommend the addition of decalcification agent into the water tank. Casing • Clean the casing only with a soft dry cloth. • Do not use aggressive or chemical cleaning agents. Metal Parts • Clean the metal parts with a cloth slightly moistened with water and a mild, non-foaming cleaning agent. Troubleshooting The steam iron puts out only little or no steam The water reservoir in the steam iron is empty. Fill the water reservoir with tap water (see "Filling with Tap Water“). - 7- KH 1281 The steam iron does not get hot The steam iron is not plugged in or not switched on. Plug the power plug into the power socket and set the temperature control to the desired temperature. The steam iron is defect. Have the defect steam iron repaired by qualified technicians. Technical Data Power Supply Voltage: 230 V~/50 Hz Power: 1200 W Disposal Do not dispose of the device in normal domestic waste. Dispose of the device over a registered waste disposal firm or through your communal waste disposal facility. Observe the currently valid regulations. In case of doubt, consult your waste disposal facility. Dispose of the packaging materials in an environmentally responsible manner. Warranty and service The warranty conditions and service address can be found on the enclosed warranty card. Importer KOMPERNASS GMBH BURGSTRASSE 21 D-44867 BOCHUM - 8 ...