Votes - 0, Average rating: 0
(
)
)
|
Other manuals for this model:
manual abstract
MSL6480 OCP
1.
Copy the firmware file to a USB flash drive.
2.
Log into the OCP as the administrator user.
3.
Insert the USB flash drive into the USB port on the front of the library.
The library detects the USB drive.
4.
Select the firmware file.
5.
Click Start Upgrade.
1/8 G2 Tape Autoloader or MSL2024, MSL4048, MSL8048, or MSL8096 RMI
1.
Download current firmware using HP Library & Tape Tools or from the HP support website: http://
www.hp.com/support/storage.
2.
Log into the RMI as the administrator user.
3.
In the Support: Firmware page, select the tape drive, browse to the location of the tape drive
firmware file, and click Update.
4.
Repeat step 3 for additional tape drives using the same firmware.
1/8 G2 Tape Autoloader or MSL2024 OCP
1.
Download current firmware using HP Library & Tape Tools or from the HP support website: http://
www.hp.com/support/storage. Copy the firmware onto the USB flash drive.
2.
Insert the USB flash drive into the USB port on the back of the Library.
3.
From the Home screen, press Next until the screen displays Support. Press Enter to select.
4.
Press Next until the screen displays Drive FW upgrade. Press Enter to select.
5.
Enter the administrator password if prompted.
6.
Press Next until the screen displays the filename of the tape drive firmware file on the USB drive.
Press Enter to select the firmware file.
7.
If the upgrade failed, press Enter to display the error code and message describing the cause of
the failure.
8.
When the upgrade is complete, remove the USB flash drive from the USB port.
MSL4048, MSL8048, or MSL8096 OCP
To upgrade firmware from the MSL4048, MSL8048, or MSL8096 OCP using a USB flash drive:
1.
Download current firmware using HP Library & Tape Tools or from the HP support website: http://
www.hp.com/support/storage. Copy the firmware onto the USB flash drive.
2.
Insert the USB flash drive into the USB port on the back of the library.
3.
From the Support menu, select FW Upgrade > By USB.
4.
Enter the administrator password if prompted.
5.
Select the tape drive as the target for the upgrade, and select the filename of the firmware. Click
Upgrade.
6.
Repeat step 4 for additional tape drives using the same firmware.
7.
When the upgrade is complete, remove the USB flash drive from the USB port.
Determining current version
To find the version of drive firmware currently installed on the MSL6480, navigate to the Status > Drive
Status screen.
To find the version of drive firmware installed on the other MSL libraries, see the RMI Support: Firmware
screen, the 1/8 G2 Tape Autoloader or MSL2024 OCP Status/Information > Drive Information option
or the MSL4048, MSL8048, and MSL8096 OCP Info > Identity > Drives option.
Determining current version
3
...Other models in this manual:
Media Storage - HP MSL Tape Library (74.27 kb)
Media Storage - HP MSL2024 0-Drive Tape Library (74.27 kb)
Media Storage - HP MSL2024 1 LTO-4 Ultrium 1760 SAS Tape Library (74.27 kb)
Media Storage - HP MSL2024 1 LTO-4 Ultrium 1840 Fibre Channel Tape Library (74.27 kb)