Powering on the library
7. Store the panel shipping restraint hardware (three sets on each side) on the lower cabinet
frame (see Figure 6).
Panel restraint
storage locations
(Left storage position shown)
Figure 6: Storing the panel shipping restraints
Powering on the library
Caution: Do not power on the library until all unpacking and installation procedures have
been followed. For more information, see the HP StorageWorks ESL E-Series Tape Library
Unpacking and Installation Guide that shipped with the library.
When the power button is pushed, the library takes approximately 10 seconds to become ready
for its internal power on sequence. After 10 seconds, the library powers on normally. The
entire power on sequence may take up to 15 minutes.
ESL E-Series Tape Library
7

---

...

Other models in this manual:
Media Storage - HP ESL 712e Ultrium Tape Library (574.79 kb)
Media Storage - HP StorageWorks ESL 286e 286 Slot SDLT Library (574.79 kb)
Media Storage - HP StorageWorks ESL 286e SDLT Tape Library (574.79 kb)
Media Storage - HP StorageWorks ESL 322e 322 Slot Ultrium Library (574.79 kb)