- DisplayPort Extender Cable with Transmitter and Receiver x 1 - User’s Manual x 1 1.7 Before Installation . Put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction. . Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high humidity. . Use the DC power adapter with correct specifications. If inappropriate power supply is used then it may cause a fire. . Do not twist or pull by force end

Mode Switch 2. HDMI OUT 3. Power Indicator 4. 5V DC Power Jack 1.7.3 DIP Switch PIN # Mode 1 OFF . Reset to Factory default EDID 1 ON . Learn & store connected monitor’s EDID 2 OFF . Analog Audio Input 2 ON . S/PDIF Audio Input S/PDIF format is dependent on the embedded digital audio part in the HDMI stream. The S/PDIF receiver must be able to recognize the input S/PDIF format. C-HDM-DVIA only separates the digital audio in HDMI stream and bypasses this decoded audio to the output. This version

6 Avenview 2 Section 1: Getting Started 1.1 Important Safeguards Please read all of these instructions carefully before you use the device. Save this manual for future reference. What the warranty does not cover • Any product, on which the serial number has been defaced, modified or removed. • Damage, deterioration or malfunction resulting from: • Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to follow instruct

Use the DVI-HDMI cable, plug the HDMI end to "INPUT" port of the Transmitter and the DVI-D end to PC or DVD Player's DVD-D video port. Connect the power adapter to the "5VDC" and plug into the power outlet c. System Turn ON: Turn on your DVI output device and monitor to confirm the functionality of the display. The "M1 LINK" LED of the Transmitter should display orange to confirm the connection of a local DVI monitor. d. Remote Monitors: Make sure the remote monitor(s) to be connected to the

Save this manual for future reference. What the warranty does not cover . Any product, on which the serial number has been defaced, modified or removed. . Damage, deterioration or malfunction resulting from: . Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to follow instructions supplied with the product. . Repair or attempted repair by anyone not authorized by us. . Any damage of the product due to shipment. . Removal or

. Use of supplies or parts not meeting our specifications. . Normal wear and tear. . Any other causes which does not relate to a product defect. . Removal, installation, and set-up service charges. 1.2 Safety Instructions The Avenview FO-HDM-1000M-EMI, HDMI Extender SET over Single Fiber Optic, has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipment’s, the FO-HDM-1000M-EMI should be used with car

1.4 Introduction Avenview FO-HDM-XX-MM Series with fiber optic cable system lets you extend digital flat panel signal up to 100 meters (330 feet) without signal degradation by at 1080p resolution. - High Speed and long distance transmission by Optical fiber - Fully compatible with HDMI 1.3 - Supports 12 bit Deep Color - Uses standard Type A HDMI receptacle - DDC and CEC signal and 5V power line are transmitter by copper line - HDCP Compliant 1.5 Model Description FO-HDM-XX-MM Model Name Length i

- FO-HDMI-1000M-EMI Transmitter x 1 - FO-HDMI-1000M-EMI Receiver x 1 - User’s Manual x 1 1.6 Before Installation . Put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction. . Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high humidity. . Use the DC power adapter with correct specifications. If inappropriate power supply is used then it may cause a fire. . Do not twist or pull by for

If an object or liquid falls or spills on to the housing, unplug the module immediately. • Have the module checked by a qualified service engineer before using it again. 1.3 Regulatory Notices Federal Communications Commission (FCC) This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Any changes or modifications made to this equipment may void t

1.4 Introduction Avenview FO-HDMI-XX-MM Series with fiber optic cable system lets you extend digital flat panel signal up to 100 meters (330 feet) without signal degradation by at 1080p resolution. - High Speed and long distance transmission by Optical fiber - Fully compatible with HDMI 1.3 - Supports 12 bit Deep Color - Uses standard Type A HDMI receptacle - DDC and CEC signal and 5V power line are transmitter by copper line - HDCP Compliant 1.5 Model Description FO-HDMI-XX-MM Model Name Length