Login:
Votes - 2, Average rating: 4.5 ( )

User manual Avenview, model FO-HDMI-SET

Manafacture: Avenview
File size: 492.32 kb
File name: FO-HDMI-SET.pdf
Language of manual:en
Free link for this manual available at the bottom of the page



manual abstract


If an object or liquid falls or spills on to the housing, unplug the module immediately. • Have the module checked by a qualified service engineer before using it again. 1.3 Regulatory Notices Federal Communications Commission (FCC) This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Any changes or modifications made to this equipment may void the user's authority to operate this equipment. AvenvTew 3 1.4 Introduction Avenview FO-HDMI-SET consists of a Transmitter and Receiver that lets you extend HDMI signal from DVD Player, Blu-ray Player Set-top box, console systems or other video equipments over fiber optical signal without any signal degradation. - High Speed and long distance transmission by Optical fiber (LC type Multi-Mode 4-ch fiber. - Extends up to 100 meters (330 feet) - Compatible with HDMI 1.3 Standard - Backward compatibility with DVI Standard 1.0 - Supports HDCP compliant device - Supports up to 1080p for HDTV and UXGA (1600 x 1200) resolution - DDC and DEC signal line is transmitted by copper line (CAT5) between internal and external power 1.5 Package Contents Before you start the installation of the converter, please check the package contents. - Receiver x 1 - Transmitter x1 - Power Adapter (+5VDC, 1.2A) x1 - Copper male to male HDMI Cable (-.5m) x2 - User's Manual 1.6 Before Installation • Put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction. • Don't place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high humidity. • Use the DC power adapter with correct specifications. If inappropriate power supply is used then it may cause a fire. • Do not twist or pull by force ends of the optical cable. It can cause malfunction. Avenview A 1.7 Installation To setup Avenview FO-HDMI-SET follow these steps for connecting to a device: 1. Power off display source such as DVD Player, Set-top box 2. Connect the enclosed copper HDMI cable into each display source and display 3. Connect copper HDMI cable which is attached to display source into FO-HDMI-SET Transmitter 4. Connect Transmitter to the HDMI cable (course) and Receiver to HDMVI Cable (display) 5. Connect the Optical cable (4ch-LC standard connector) between Transmitter and Receiver by order no 1, 2, 3, 4 6. Connect the UTP cable (RJ45 connector) for DDC 7. Power on the source and display (check the LED light on of Transmitter and Receiver) If there is no LED light on, insert the enclosed external power adapter into Transmitter. 1.8 General Troubleshooting Problem Possible Solution No Image • Check if connection to the computer and the monitor are correct. • Check length of the cable between Transmitter and Receiver Screen Defects Appear • This product supports up to UXGA resolution. • Check the DVI connection • Check the maximum resolution range of the graphics card. Avenview 5 Section 2: Specifications Item Description Video Bandwidth 16SMHz (Single Link) Video Input i Single Link HDMI Input Connector i HDMI Type A Receptacle Video Output i Single Link HDMI Power SV i.2A DC Power Consumption O.SSWatt Output Connector iHDMI Type A Receptacle Maximum Supported Up to i080p Resolution UXGA 160o x i200 @ 60Hz Maximum Cable Length i00 meters (330 feet) Optical Optical Source 8S0nm VCSEL O/E Converter PIN Photo Diode Fiber Type Multi-Mode Fiber Environmental Operation 0° to S0°C Degree 2.1 Signal Pin Assignment Pin Signal Pin Signal i TMDS Data 2+ 2 TMDS Data2 Shield 3 TMDS Data 2- 4 TMDS Data 1+ S TMDS Data 1 Shield б TMDS Data 1- 7 TMDS Data 0+ 8 TMDS Data0 Shield 9 TMDS Data 0- 10 TMDS Clock+ ii TMDS Clock Shield 12 TMDS Clock- 13 CEC 14 Reserved (N.C. on device) iS SCL 16 SDA 17 DDC/CEC Ground 18 +5V Power 19 Hot Plug Detect Avenview б Avenvîew Disclaimer While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of anticipatory profits, or for punitive, incidental or consequential damages in connection with the furnishing, performance, or use of the Avenview hardware, software, or other products and documentation provided herein. Avenview Inc. reserves the right to make changes without further notice to a product or system described herein to improve reliability, function or design. With respect to Avenview products which this document relates, Avenview disclaims all express or implied warranties regarding such prod...


Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category