Votes - 3, Average rating: 3.7 ( )

Manafacture: Sony File size: 683.96 kb File name: Language of manual:

Other manuals for this model:

Televisions - KDL-46W5810 (12 mb)

Televisions - KDL-46W5810 (11.98 mb)

Televisions - KDL-46W5810 (11.97 mb)

Televisions - KDL-46W5810 (12.52 mb)

Show all

Televisions - KDL-46W5810 (20.18 mb)

• Once server settings are changed, turn the TV off and on by pressing 1 on the TV. • Execute “Server Diagnostics”. When using a PC as the server • Check if the PC is turned on. Do not turn off the PC while accessing. • If security software is installed on the PC, be sure to allow connections from external devices. For details, refer to the manual supplied with your security software. • The load on the PC may be too high or the server application may become unstable. Try the following: –Stop the server application and restart it. –Restart the PC. –Reduce the number of applications running on the PC. –Reduce the amount of content. 24 GB Condition Condition Changes on the server are not • Sometimes changes are not applied to displays on the TV even though being applied or displayed content has been added and/or deleted on the server. If this happens, go content differs from content back up one level and try opening the folder or server again. on the server. Photo, music and/or video files do not appear or icons are not displayed. Preliminary Check • Check that the connected device supports DLNA. • Operations are not guaranteed for all servers. Also, operations differ depending on the features of the server and the content in question. • Turn the connected device on. Check Connections • Check that the LAN cable and/or mains lead/AC power cord of the server has not become disconnected. Check Settings • Check that the connected device is registered under “Server Display Settings”. • Check that the server is correctly configured. • Check that the selected device is connected to the network and can be accessed. • If the “IP Address Settings” in “Network” under “Network Settings” is set to “DHCP (DNS automatic)” or “DHCP (DNS manual)”, it may take some time to recognise devices if there is no DHCP server. Execute “Server Diagnostics”. The TV cannot be found from Check Connections renderer-compatible device • Check that the LAN cable and/or mains lead of the server has not (the controller). become disconnected. Check Settings • Check if the “Renderer Function” is activated. • Check that the connected device is registered under “Renderer Access Control”. Only a few icons appear under • This is normal when internet connection is not available. the "Network" in the Home You can use three pre-installed Widgets properly. To enjoy more Menu. Widgets, please check that the LAN cable and/or mains lead/AC power cord of the router/modem has not become disconnected. (*) Additional You have been using registered Widgets, but now some contents won't appear on the Widgets. • Check that the LAN cable and/or mains lead/AC power cord of the router/modem has not become disconnected. (*) • There's a possibility that the Widget Provider's server is out of service. Please try using the Widget later. (*) Your router/modem must be properly set to connect to the internet in advance. Please contact your Internet Service Provider for the router/ modem settings. General Auto Setup ...

Download now

Please, enter two numbers from picture: