Votes - 2, Average rating: 3.5 ( )

Manafacture: Sony File size: 683.96 kb File name: Language of manual:

Other manuals for this model:

Televisions - KDL-40W5830 (12 mb)

Televisions - KDL-40W5830 (11.98 mb)

Televisions - KDL-40W5830 (11.97 mb)

Televisions - KDL-40W5830 (12.52 mb)

Show all

Televisions - KDL-40W5830 (20.18 mb)

This affects the “Video Settings” menu and “Screen” menu settings. To view PC contents, set “Screen Format” to “Wide” and “Display Area” to “Full Pixel”. ~ • This TV’s PC input does not support Sync on Green or Composite Sync. • This TV’s PC input does not support interlaced signals. • For the best picture quality, it is recommended to use the signals in the above chart with a 60 Hz vertical frequency (boldfaced). 22 GB Troubleshooting Troubleshooting When the 1 (standby) indicator is flashing The self-diagnosis function is activated. 1 Count how many times the 1 (standby) indicator flashes between each two second break. For example, the indicator may flash three times, go off for two seconds, then flash again three times. 2 Press 1 on the TV to turn it off, disconnect the mains lead, and inform your dealer or Sony service centre of how the indicator flashes (number of flashes). When the 1 (standby) indicator is not flashing 1 Check the items in the tables below. 2 If the problem persists, have your TV serviced by qualified service personnel. Condition Explanation/Solution Picture There is no picture (screen is • Check the aerial/antenna/cable connection. dark) and no sound. • Connect the TV to the mains/AC power, and press 1 on the TV. • If the 1 (standby) indicator lights up in red, press "/1. No picture or menu • Press to display the list of inputs, then select the desired input. information from equipment • Check the connection between the optional equipment and the TV. connected to the scart connector appears on the screen. Ghosting occurs, or double • Check the aerial/antenna/cable connection. images appear. • Check the aerial/antenna location and direction. Only snow and noise appear • Check if the aerial/antenna is broken or bent. on the screen. • Check if the aerial/antenna has reached the end of its serviceable life (three to five years for normal use, one to two years when used at the seaside). There is picture or sound noise • Adjust “AFT” (Automatic Fine Tuning) to obtain better picture when viewing a TV channel. reception. Tiny black points and/or • The screen is composed of pixels. Tiny black points and/or bright points bright points appear on the (pixels) on the screen do not indicate a malfunction. screen. The picture contours are • Select “Standard” or “Off” in “Motionflow” (except for KDL-52V58xx, distorted. 46V58xx, 40V58xx, 37V58xx, 32V58xx). • Change the current setting of “Film Mode” to other settings. The picture is not displayed in • Select “Reset”. colour. The picture from equipment • Check the connection of the COMPONENT IN sockets and check if connected to the the sockets are firmly seated in their respective sockets. COMPONENT IN sockets is not displayed in colour, or is displayed in irregular colours. Additional 23 GB Condition Explanation/Solution Condition Explanation/Solution • Turn the connected equipment on. • Check the cable connection. • Press to display the list of inputs, then select the desired input. • Cor...

Download now

Please, enter two numbers from picture: