Votes - 5, Average rating: 3.6
(
)
)
|
Other manuals for this model:
manual abstract
If the HDMI cables are not High Speed HDMI Cable, flickering or no screen display can result. Please use the High Speed HDMI Cable. 3 EXTERNAL EQUIPMENT SETUP EXTERNAL EQUIPMENT SETUP EXTERNAL EQUIPMENT SETUP CONNECTING WITH AN HDMI TO DVI CABLE Connect the digital set-top box or the DVI output of the PC to HDMI/DVI IN 1(DVI) jack on the TV. Connect the audio output of the digital set-top box or the PC audio output to the AUDIO IN (RGB/DVI) jack on the TV. Turn on the digital set-top box or the PC and the TV. (Refer to the digital set-top box or the PC manual for operating instructions.) 4 Select HDMI1 input source using the INPUT button on the remote control. r i '#■ 4 or OVWJTV OUTPUT o o CM-PC OUTPUT AUDIO 4 CONNECTING WITH A EURO SCART CABLE Connect the Euro scart socket of the external equipment (DVD, VCR, etc.) to the AV1 Euro scart socket on the TV. Turn on the external equipment. (Refer to the external equipment's manual for operating instructions.) Select AV1 input source using the INPUT button on the remote control. Input Output Scart Video Audio RGB Video, Audio AV1 O O O Analogue TV, Digital TV (RGB) fir i©- Ü — if o ANTENN IN Output Type AV1 AV1 Current (TV Out) (When DTV scheduled recording is in input mode progress using recording equipment.) ► TV Out : Outputs Analogue TV or Digital TV signals. Digital TV Digital TV O Analogue TV, AV Analogue TV O Component/RGB Analogue TV (The input mode is converted to DTV.) HDMI X X O NOTE ► Any Euro scart cable used must be signal shielded. ► When watching digital TV in 3D imaging mode, monitor out signals cannot be output through the SCART cable. (Only 42/47LX6***, 47/55LX9***, 50/60PX9***) ► If you set the 3D mode to On while a scheduled recording is performed on digital TV, monitor out signals cannot be output through the SCART cable, and the recording cannot be performed. (Only 42/47LX6***, 47/55LX9***, 50/60PX9***) 5 EXTERNAL EQUIPMENT SETUP EXTERNAL EQUIPMENT SETUP EXTERNAL EQUIPMENT SETUP USB SETUP ^1^ Connect the USB device to the USB IN 1 or USB IN 2 jack on the TV. After connecting the USB IN 1 or USB IN 2 jack, you use the USB function. (► p.90) or CONNECTING WITH AN RF CABLE To avoid picture noise (interference), allow adequate distance between the VCR and TV. Connect the ANT OUT socket of the VCR to the ANTENNA IN socket on the TV. Connect the antenna cable to the ANT IN socket of the VCR. Press the PLAY button on the VCR and match the appropriate channel between the TV and VCR for viewing. 1 ANTE SNA 1 ANT OUT S-VIDEO VIDEO O O o ® ® ® № E T ANT IN _l : OUTPUT SWITCH Wall Jack Antenna y 6 CONNECTING WITH AN RCA CABLE Connect the AUDIO/VIDEO jacks between TV and VCR or external equipment. Match the jack colours (Video = yellow, Audio Left = white, and Audio Right = red) Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) Or, Operate the corresponding external equipment. (Refer to external equipment operating guide.) Select AV2 input source using the INPUT button on the remote control. If connected to AV IN 3, select AV3 input source. ft NOTE ► If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the TV. or © or 0 Camcorder №№ O Q © © © Ljr^—r. '] Video Game Set 7 EXTERNAL EQUIPMENT SETUP EXTERNAL EQUIPMENT SETUP EXTERNAL EQUIPMENT SETUP CONNECTING WITH A D-SUB 15 PIN CABLE This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. Connect the RGB output of the PC to the RGB IN (PC) jack on the TV. ©Connect the PC audio output to the AUDIO IN (RGB/DVI) jack on the TV. ^3 Turn on the PC and the TV ^ Select RGB input source using the INPUT button on the remote control. 8 INSERTION OF A CI MODULE To view the encrypted (pay) services in digital TV mode. This feature is not available in all countries. ^ Insert the CI Module to PCMCIA (Personal Computer Memory Card International Association) CARD SLOT of TV as shown. For further information, see p.48. «NOTE ► Check if the CI module is inserted into the PCMCIA card slot in the right direction. If the module is not inserted properly, this can cause damage to the TV and the PCMCIA card slot. Check this point as shown and insert the CI Module. HEADPHONE SETUP (Except for 50/60PK5**, 50/60PK7***, 50/60PK9***, 50/60PX9***, 42/47LX6* 47/55LX9***) You can listen the sound through the headphone. Plug the headphone into the headphone socket. To adjust the headphone volume, press the ^ + or - button. If you press the MUTE button, the sound from the headphone is switched off. & NOTE ► AUDIO menu items are disabled when connecting a headphone. ► When changing AV MODE with a headphone connected, the change is applied to video but not to audio. ► Optical Digital Audio Out is not available when connecting a headphone. ► Headphone impedance: 16 Q ► Ma...
Other models in this manual:Televisions - 32LD750 (7.43 mb)
Televisions - 32LE7500 (7.43 mb)
Televisions - 37LE7500 (7.43 mb)
Televisions - 42LD650 (7.43 mb)