Votes - 4, Average rating: 4
(
)
)
|
Other manuals for this model:
manual abstract
– Lower LNB Oscillators: Sets the LNB oscillators to a lower frequency. – Upper LNB Oscillators: Sets the LNB oscillators to a higher frequency. . – Tone 22 kHz (Off / On / Auto): Selects the Tone 22 kHz depending on the . LNB type. For a universal LNB it should be Auto. – Signal Quality : Display the current status of broadcasting signal. English . Positioner Settings: Configures the antenna positioner. Positioner (On / Off): Enables or disables the positioned control. Positioner Type (USALS / DiSEqC 1.2): Sets the positioned type between DiSEqC 1.2 and USALS(Universal Satellite Automatic Location System). – My Longitude: Sets the longitude for my location. – My Latitude: Sets the latitude for my location. – Satellite Longitude Settings: Sets the longitude of user defined satellites. . . English User Mode: Sets the position of satellite antenna according to each satellite. If you store the current position of satellite antenna according to a certain satellite, when the signal of that satellite is needed, the satellite antenna can be moved to pre-populated position. – Satellite: Selects the satellite to set the position for. – Transponder: Selects a transponder from the list for signal reception. – Moving Mode: Selects the movement mode between discrete and continuous movement. . . – Step Size: Adjusts the step size degrees for the antenna rotation. Step Size is available when Moving Mode is set to Step. English – Go to Stored Position: Rotates the antenna to the stored satellite position. – Antenna Position: Adjusts and stores the antenna position for the selected satellite. – Store Current Position: Stores current position as the selected positioner limit. – Signal Quality: Display the current status of broadcasting signal. . . English Installer Mode: Sets limits to the scope of movement of satellite antenna or reset the position. Generally, installation guide uses this function. – Limit Position (East / West): Selects the direction of the positioner Limit. – Antenna Position: Adjusts and stores the antenna position for the selected satellite. – Store Current Position: Stores the current position as the selected positioner Limit. – Go to Zero: Moves the antenna to the reference position. . . – Reset Positioner Limit: Allows the antenna to rotate over the full arc. . Reset All Setting (Yes / No): All satellite settings will be reset to the initial values. English . Other Features O MENUm > Channel > ENTERE ¦ Guide Type (Samsung / Rovi On Screen) for LED 6500 Series and above (depending on the country) You can select a different type of Guide. . Samsung: Uses the guide programme by provided samsung. . . . Rovi On Screen: Uses the guide programme provided by Rovi International Solutions. N ROVI EPG initial setting time can take a while depending on the region or broadcast environment. English ¦ Fine Tune (analogue channels only) If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and...
Other models in this manual:Televisions - UA46D6000SW (8.13 mb)
Televisions - UE37D6120SW (8.13 mb)
Televisions - UA40D6600WS (8.13 mb)