Votes - 3, Average rating: 4.3
(
)
)
|
Other manuals for this model:
manual abstract
Turn on the Wi-Fi Direct device and activate its Wi-Fi Direct function. 2. Go to the Wi-Fi Direct screen. (Network > Wi-Fi Direct) The TV starts to search devices and then displays the devices on the Wi-Fi Direct screen. 3. Turn on the Wi-Fi Direct function on your device. Select the desired Wi-Fi device. – For PBC: Press the WPS(PBC) button on your Wi-Fi device within 2 minutes. The Connecting popup appears, followed by the Connected pop-up. When it closes, you should see the device listed on the Wi-Fi Direct screen as connected. – For PIN: Input the displayed PIN on your device. The Connecting popup appears, followed by the Connected pop-up. When it closes, you should see the device listed on the Wi-Fi Direct screen as connected. N If you want to disconnect the device, select the connected Wi-Fi device, and then select Disconnect. N The TV and BD products perform the role of the Group Owner. If a TV or BD is connected via Wi-Fi Direct, the connected device is represented as a Group Owner in the Wi-Fi Direct list. However, even in this case, the TV cannot connect to another TV or BD through Wi-Fi Direct. Soft AP Menu > Network > Soft AP Using this function, you can connect the TV to your mobile devices if your mobile devices do not support Wi-Fi Direct. The Soft AP screen lets you set the options for connecting Wi-Fi devices. . Soft AP Turns Soft AP on or off. When Soft AP is set to On, your mobile devices can find the TV's network name in their Wi- Fi connection list. . Security Key Enter a Security Key at least 8 characters long using the remote control. Select Done when finished. – If the security key is not at least 8 characters long, Done is not available. – To connect a mobile device to the TV, you must input the security key into the device. – If network does not operate correctly, check the security key again. An incorrect security key may cause a malfunction. Using Wi-Fi Direct or Soft AP, you can share data through AllShare Play. (For only some of the mobile device models among the mobile device models supporting Wi-Fi Direct or Soft AP.) Wi-Fi Direct Soft AP Number of Wi-Fi devices that can be connected Up to 5 Up to 5 Data sharing Supported through AllShare (only for supported mobile device models.) Only through AllShare AllShare Settings Menu > Network > AllShare Settings AllShare Play lets you play Videos, Photos, or Music located on your PC or your DLNA compatible device on the TV using a network connection. It also lets you control the TV through these devices. The AllShare Settings screen lists your network connected AllShare devices and their IP addresses. Through this screen, you can allow a device to access the TV, deny access, or delete the device from the AllShare list. The AllShare Settings screen only displays devices if you have established networked connections to AllShare devices. Otherwise, it will be empty. networked connections to AllShare devices. Otherwise, it will be empty. To use the AllShare network function, you must install the AllShare network software on your PC. For details on set up options, refer to "Using the AllShare Play Functions". Device Name Menu > Network > Device Name Enter a name for this TV. This name will be shown on network remote controls and devices using AllShare Play. N A keyboard appears on the screen. Key in a name for your TV manually using your remote. When finished, select Done. N To enter letters, highlight and select each letter. To enter numbers, highlight and select each number or press the number buttons on your remote. N To shift to capital letters (or from capital letters to lower case), select the Caps or Shift button. N To display symbols and punctuation, select . To redisplay letters, select again. Setting the Time Time Menu > System > Time N The current time will appear every time you select INFO using your remote. . Clock Set the clock to use the various timer features of the TV. N If you disconnect the power cord, you have to set the clock again. Clock Mode: Set the current time manually or automatically. – Auto: The TV sets the current time automatically using the time from a digital channel. N You must have the cable or an aerial connected to the TV to set the time automatically. N Depending on the broadcast station and signal, the auto time set up may not be correct. In this case, set the time manually. – Manual: Set the current time manually. Clock Set: Set the Date and Time manually. You can set the current date and time using your remote. N Available only when the Clock Mode is set to Manual. Time Zone: Select your time zone. N This function is only available when the Clock Mode is set to Auto. GMT: Selects your time zone. N When Country is set to Others, you can use this function. DST: Switches the DST (Daylight Saving Time) function on or off. N This function is only available when the Clock Mode is set to Auto. . Sleep Timer Automatically shuts off the TV after a preset period of time. (30, 60, 90, 120, 150, or 180 minutes...
Other models in this manual:Televisions - PS43E450A1W (2.15 mb)
Televisions - PS51E550D1K (2.15 mb)
Televisions - PS51E550D1P (2.15 mb)
Televisions - PS51E550D1W (2.15 mb)