Votes - 4, Average rating: 4
(
)
)
|
Other manuals for this model:
manual abstract
2. Turn on the DVD player and TV. 3. Press the input selector on your TV remote control until the Video signal from the DVD player appears on the TV screen. B. Connection to an Audio System (2 Channel Amplifier, Dolby Digital, MPEG2) 1. Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of the Amplifier. If using a coaxial cable, connect the DIGITAL AUDIO OUT (COAXIAL) terminal on the rear of the DVD player to the DIGITAL AUDIO IN (COAXIAL) terminal of the Amplifier. 2. Using the video signal cable(s), connect the VIDEO terminals on the rear of the DVD player to the VIDEO terminals of your TV 3. Turn on the DVD player, TV, and Amplifier. 4. Press the input select button of the Amplifier to select external input in order to hear sound from the DVD player. Refer to your Amplifier's user manual to set the Amplifier's audio input. Note - Noise may be generated if the audio cable is too close to the power cable. - If you want to connect to an Amplifier, please refer to the Amplifier connection page. - The position of terminals can vary depending on your TV set. Please refer to the user’s manual of the TV. - If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) terminal of the DVD player. - If you press the VIDEO SEL. button when DVD Player is in stop mode or no disc is inserted, the Video Output mode changes in the following sequence: (SCART-RGB . SCART-CVBS). 5 A B C Scart kabel Audio kabel Video kabel Audio kabel Coaxial kabel WHITE WHITE WHITE WHITE RED RED RED RED YELLOW YELLOW Playing a Disc Basic functions Before Play - Turn on your TV and set it to the correct Video Input by pressing TV/VIDEO button on the TV remote control. - If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input. After plugging in the player, the first time you press the DVD POWER button, this screen comes up: If you want to select a language, press the ./† button, and then press the ENTER button. (This screen will only appear when you plug in the player for the first time.)If the language for the startup screen is not set, the set-tings may change whenever you turn the power on or off. Therefore, make sure that you select the language you want to use.Once you select a menu language, you can change it by pressing the ®|| button on the front panel of the unit for more than 5 seconds with no disc in the unit. Then the SELECT MENU LANGUAGE window appears again where you can reset your preferred language. Using the Search and Skip Functions During play, you can search quickly through a chapter or track, and use the skip function to jump to the next selection. Searching through a Chapter or Track During play, press the SEARCH (k or K) button on the remote control for more than 1 second. Skipping Tracks During play, press the SKIP (|k or K|) button. - When playing a DVD, if you press the SKIP (K|) button, it moves to the next chapter. If you press the SKIP (|k) button while play time <5s,it moves to previous chapter, but if you press SKIP (|k), while play time >5s it moves to the beginning of the current chapter. - When playing a CD, if you press the SKIP (K|) button while play time <5s,it moves to previous track, but if you press SKIP (|k) while play time >5s it moves to the beginning of the current track. Note - The speed marked in this function may be different from the actual playback speed. - No sound is hearing during search mode (Except CD). DVD CD 2X, 4X, 8X, 16X, 32X 2X, 4X, 8X, 16X, 32X Using the Display Function When Playing a DVD/MPEG4 1. During play, press the TOOLS button on the remote control. 2. Press the ./† buttons to select the desired item. 3. Press the v/® buttons to make the desired setup. 4. To make the screen disappear, press the TOOLS button again. The Tool Button Display functions are listed in the table below. To access the desired title when there is more than one in the disc. For example, if there is more than one movie on a DVD, each movie will be identified. Most DVD discs are recorded in chapters (similar to tracks on an audio CD). Select this function to find and play a specific chapter. Allows playback of the film from a desired time. You must enter the starting time as a reference. The time search function does not operate on some discs. Lets you select the soundtrack language for a film. A DVD disc can have up to eight different soundtracks. Lets you select the subtitle language or, if you prefer, turn off subtitles. A DVD disc can have up to 32 different sets of subtitles, each in a different language. Lets you choose the EZ-View type Select to activate the Zoom function. Some DVDs have scenes that have been recorded at multiple angles. Use the Angle function to view a scene at one of those angles. EZ 6 Using the Disc and Title Menu During the playback of a DVD disc, press the Disc Menu /Title Menu button on the remote control...
Other models in this manual:DVD Players - DVD-E360 (2.91 mb)