Votes - 2, Average rating: 4
(
)
)
|
Other manuals for this model:
manual abstract
Anynet+ devices connected to the TV are listed. . If you cannot find a device you want, press the Red button to refresh the list. 2. Select a device and press the ENTERE button. You can switch to the selected device. . Only when you set Anynet+(HDMI-CEC) to Onin the Application menu, the DeviceList menu appears. • Switching to the selected device may take up to 2 minutes. You cannot cancel the operation during the switching operation. • If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device by using the DeviceList. 04 Advanced Features English 43 Advanced Features ¦ Recording You can make a recording of a TV Programme using a Samsung recorder. 1. Select Recording. . When there are more than two recording devices • When multiple recording devices are connected, the recording devices are listed. Select one recording device in the DeviceList. . When the recording device is not displayed, select DeviceList and press the Red button to search devices. 2. Press the EXIT button to exit. . You can record the source streams by selecting Recording: (device_name). . Pressing the .. (REC) button will record whatever you are currently watching. If you are watching video from another device, the video from the device is recorded. . Before recording, check whether the antenna jack is properly connected to the recording device. To properly connect an antenna to a recording device, refer to the recording device’s users manual. ¦ Listening through a Receiver You can listen to sound through a receiver (i.e Home Theatre) instead of the TV Speaker. 1. Select Receiver and set to On. 2. Press the EXIT button to exit. . If your receiver supports audio only, it may not appear in the device list. . The receiver will work when you have properly connected the optical in jack of the receiver to the DIGITALAUDIOOUT(OPTICAL)jack of the TV. . When the receiver (i.e Home Theatre) is set to On, you can hear sound output from the TV’s Optical jack. When the TV is displaying a DTV (aerial) signal, the TV will send out 5.1 channel sound to the receiver. When the source is a digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the receiver. . NOTE • You can only control Anynet+ devices using the TV remote control, not the buttons on the TV. • The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device. • The Anynet+ functions do not operate with other manufacturers’ products. 44 English ¦ Troubleshooting for Anynet+ Problem Possible Solution Anynet+ does not work. • Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. • Connect only one receiver (home theatre). • Check if the Anynet+ device power cord is properly connected. • Check the Anynet+ device’s Video/Audio/HDMI cable connections. • Check whether Anynet+(HDMI-CEC)is set to Onin the Anynet+ setup menu. • Check whether the TV remote control is in TV mode. • Check whether it is Anynet+ exclusive remote control. • Anynet+ doesn’t work in certain situations. (Searching channels, operating Media Playor Plug&Play(Initial setup), etc.) • When connecting or removing the HDMI cable, please make sure to search devices again or turn your TV off and on again. • Check if the Anynet+ Function of Anynet+ device is set on. I want to start Anynet+. • Check if the Anynet+ device is properly connected to the TV and check if the Anynet+(HDMI-CEC)is set to Onin the Anynet+ Setup menu. • Press the TOOLSbutton to display the Anynet+ menu and select a menu you want. I want to exit Anynet+. • Select View TVin the Anynet+ menu. • Press the SOURCEbutton on the TV remote control and select a device other than Anynet+ devices. • Press P>/<, and PRE-CHto change the TV mode. (Note that the channel button operates only when a tuner-embedded Anynet+ device is not connected.) The message “Connecting to Anynet+ device...” appears on the screen. • You cannot use the remote control when you are configuring Anynet+ or switching to a view mode. • Use the remote control when the Anynet+ setting or switching to view mode is complete. The Anynet+ device does not play. • You cannot use the play function when Plug&Play(Initial setup) is in progress. The connected device is not displayed. • Check whether or not the device supports Anynet+ functions. • Check whether or not the HDMI cable is properly connected. • Check whether Anynet+(HDMI-CEC)is set to Onin the Anynet+ setup menu. • Search Anynet+ devices again. • You can connect an Anynet+ device using the HDMI cable only. Some HDMI cables may not support Anynet+ functions. • If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power cord or a power failure, please repeat the device scan. The TV Programme cannot be recorded. • Check whether the antenna jack on the recording device is properly connected. The TV sound is no...
Other models in this manual:Televisions - UE32C6700US (21.69 mb)
Televisions - UE32C6710US (21.69 mb)
Televisions - UE32C6730US (21.69 mb)
Televisions - UE32C6740SS (21.69 mb)