Votes - 3, Average rating: 4.3
(
)
)
|
Photos and specs Sony KDL-46NX720 |
manual abstract
DVD recorder) ~ • Use an antenna cable connector no greater than 14 mm in thickness. • Use an HDMI cable connector within 12 mm (thickness) x 21 mm (width). Connecting a Set Top Box/recorder (e.g. DVD recorder) with SCART B For KDL-65HX92x ~ • Right Angle Type Universal SCART Lead is recommended for this connection. Getting Started (supplied) Set Top Box/recorder (e.g. DVD recorder) Set Top Box/recorder (e.g. DVD recorder) (Continued) 11 GB Connecting a Set Top Box/recorder Connecting a Set Top Box/recorder DVD recorder) with HDMI 4: Connecting audio/video devices B For KDL-65HX92x BFor KDL-60/55/46/40NX72x, KDL-55/46HX92x, KDL-55/46HX82x BFor KDL-65HX92x Set Top Box/recorder (e.g. DVD recorder) Audio/video device Set Top Box/recorder (e.g. DVD recorder) 12 GB B B, KDL-55/46HX92x, KDL-55/46HX82x 5: Preventing the TV from toppling over Audio/video device AV/Component adapter (supplied) 1 Install a wood screw (4 mm in diameter, not supplied) in the TV stand. 2 Install a machine screw (not supplied) into the screw hole of the TV. For KDL-65HX92x Use M6 screw For KDL-60/55/46/40NX72x, KDL-55/46HX92x, KDL-55/46HX82x Use M4 screw 3 Tie the wood screw and the machine screw with a strong cord (not supplied). The length of the M6/M4 machine screw differs depending on the cord diameter. Please refer to below illustration. 5-6 mm Screw M6/M4 Cord TV’s Table-Top Stand Getting Started 13 GB 14 GB 6: Bundling the cables ~ • Before bundling the cables, remove the cable holder from the AC cover (see step 1 and 2). Reuse the cable holder (see step 3) to bundle the other cables (see step 4). • Do not bundle the AC power cord (mains lead) together with other cables. * When installing on the wall, attach the cable holder under the terminals. 7: Performing the initial setup 1 Connect the TV to your AC power outlet (mains socket). 2 Check the ENERGY SAVING switch setting is on (z). 3 Press 1 on the TV. The = (power) indicator will light up in green. When you switch on the TV for the first time, the Language menu appears on the screen. ~• When you turn on the TV for the first time, the TV requires some internal processing for optimization before you can perform the initial setup. There will be no picture and sound, and the timer indicator on the front of the TV blinks orange for about 40 seconds. Do not turn off the TV during this process. This process has been completed at the factory for some TVs. Follow the instructions on the screen. Digital Auto Tuning: When you select “Cable”, we recommend that you select “Quick Scan” for quick tuning. Set “Frequency” and “Network ID” according to the information supplied from your cable provider. If no channel is found using “Quick Scan”, try “Full Scan” (though it may take some time). 3 1 2 1 2 3 3 4 4 * KDL-60/55/46/40NX72x, KDL-55/46HX92x, KDL-55/46HX82x KDL-65HX92x 4 ~ ~ “Full Scan” may not be available depending on your region/country. Programme Sorting: Changes the order of analogue channels stored in the TV. 1 Press F/f to select the channel you want to move to a new position, then press . 2 Press F/f to select the new position for the channel, then press . ~ • You can also tune channels manually. Getting Started 15 GB Using Your BRAVIA TV Using Your BRAVIA TV 1 Turn on the TV. 1 Switch ENERGY SAVING switch on (z). 2 Press 1 on the TV to turn on the TV. 2 Select a mode. 3 Select a TV channel. 2 To use Digital Electronic Programme Guide GUIDE Press GUIDE in digital mode to display the programme guide. 3 Use with 0-9 to select digital channels. For channel numbers 10 and above, press the next digit quickly. z • The number 5, N, PROG + and AUDIO buttons on the remote have a tactile dot. Use the tactile dots as a reference when operating the TV. 16 GB Parts and controls of the remote Parts and controls of the remote and see the built-in manual (i-Manual) (page 20). 1 :/1 Press to turn the TV on and off from standby mode. 2 i-MANUAL Displays the built-in manual (i-Manual). 3 SYNC MENU Displays the BRAVIA Sync Menu to operate the BRAVIA Sync-compatible equipment that is connected to the TV. 4 F/f/G/g/ Moves the on-screen cursor, and confirm the item. 5 OPTIONS Displays a list of convenient functions and menu shortcuts. The menu items vary based on the current input and/or content. 6 Coloured buttons When the coloured buttons are available, an operation guide appears on the screen. 7 PROG/CH +/–/Number buttons Select channels in the TV mode. 8 2 +/– Adjusts the volume. Rear of Remote Control Using Your 17 GB Selecting various functions and settings (Home Menu) Selecting various functions and settings (Home Menu) page 19 for the Home menu map. 1 Press HOME. 2 Press F/f/G/g/ to select items. 2 1, 3 To select items in the Home menu (e.g., selecting “Settings”) 1 Press G/g to select “Settings”. The contents of “Settings” are displayed on the right. 2 Press F/f to select “Display”. 3 Press to launch the menu. According to the screen instruction, press F/f/G/g to select items and press to confir...
Other models in this manual:Televisions - KDL-46NX723 (3.84 mb)
Televisions - KDL-60NX720 (3.84 mb)
Televisions - KDL-60NX723 (3.84 mb)
Televisions - KDL-55NX720 (3.84 mb)