Votes - 2, Average rating: 3
(
)
)
|
Other manuals for this model:
manual abstract
When a channel has been found, the search will stop. To continue searching, press F/f. If you know the channel number (frequency) Press the number buttons to enter the channel number of the broadcast you want or your VCR channel number. 8 Press to jump to “Confirm”, then press . 9 Press f to select “OK”, then press . Repeat the procedure above to preset other channels manually. Label Assigns a name of your choice, up to five letters or numbers, to the selected channel. This name will be displayed briefly on the screen when the channel is selected. To input characters, follow steps 2 to 4 of “Programme Labels” (page 32). AFT Allows you to fine-tune the selected programme number manually if you feel that a slight tuning adjustment will improve the picture quality. You can adjust the fine tuning over a range of -15 to +15. When “On” is selected, the fine tuning is performed automatically. Audio Filter Improves the sound for individual channels in the case of distortion in mono broadcasts. Sometimes a non-standard broadcast signal can cause sound distortion or intermittent sound muting when watching mono programmes. If you do not experience any sound distortion, we recommend that you leave this option set to the factory setting “Off”. Notes • You cannot receive stereo or dual sound when “Low” or “High” is selected. • “Audio Filter” is not available when “System” is set to “L”. Using MENU Functions Continued 33 GB Skip Skips unused analogue channels when you press PROG +/- to select channels. (You can still select a skipped channel using the number buttons.) Decoder Views and records the scrambled channel selected when using a decoder connected directly to scart connector / 1, or to scart connector / 2 via a VCR. Note This option is not available when “United Kingdom” is selected for “Country” (page 6). Confirm Saves changes made to the “Manual Programme Preset” settings. 34 GB Digital Set-up menu You can select the options listed below on the Digital Set-up menu. To select options in “Settings”, refer to “Picture menu” (page 23). Note Some functions may not be available in some countries. Digital Settings Displays the “Digital Settings” menu. Subtitle Setting Displays digital subtitles on the screen. When “For Hard Of Hearing” is selected, some visual aids may also be displayed with the subtitles (if TV channels broadcast such information). Subtitle Language Selects which language subtitles are displayed in. Audio Language Selects the language used for a programme. Some digital channels may broadcast several audio languages for a programme. Audio Type Increases the sound level when “For Hard Of Hearing” is selected. Parental Lock Sets an age restriction for programmes. Any programme that exceeds the age restriction can only be watched after a PIN Code is entered correctly. 1 Press the number buttons to enter your existing PIN code. If you have not previously set a PIN, a PIN code entry screen appears. Follow the instructions of “PIN Code” below. 2 Press F/f to select the age restriction or “None” (for unrestricted watching), then press . 3 Press RETURN. PIN Code Sets a PIN code for the first time, or allows you to change your PIN code. 1 Enter a PIN as follows: If you have previously set a PIN Press the number buttons to enter your existing PIN. If you have not set a PIN Press the number buttons to enter the factory setting PIN of 9999. 2 Press the number buttons to enter the new PIN code. A message appears to inform you that the new PIN has been accepted. 3 Press RETURN. Tip PIN code 9999 is always accepted. Continued 35 GB Using MENU Functions Technical Set-up Displays the Technical Set-up menu. “Auto Service Update”: Enables the TV to detect and store new digital services as they become available. “Software Download”: Enables the TV to automatically receive software updates free through your existing aerial (when issued). It is recommended that this option be set to “On” at all times. If you do not want your software to be updated, set this option to “Off”. “System Information”: Displays the current software version and the signal level. “Time Zone”: Allows you to manually select the time zone you are in, if it is not the same as the default time zone setting for your country. CA Module Set-up Allows you to access a Pay Per View service once you obtain a Conditional Access Module (CAM) and a view card. See page 39 for the location of the (PCMCIA) socket. Notes • CAM is not supported in all countries. Check with your authorized dealer. • “CA Module Set-up” is available only when a CAM is inserted. Digital Tuning Displays the “Digital Tuning” menu. Digital Auto Tuning Tunes in all the available digital channels. Usually you do not need to do this operation because the channels were already tuned when the TV was first installed (page 7). However, this option allows you to repeat the process (e.g. to retune the TV after moving house, or to search for new channels that have been launched by broadcasters). Program...