Votes - 0, Average rating: 0
(
)
)
|
Other manuals for this model:
manual abstract
P2 2P2 ... 449 P1 3 ... P1 P2 4 ... 500 Unused Space = 150 GB Disk Drives in Logical Drive Unused Space = 150 GB = 500 GB plus Parity (P1 & P2) RAID 6 Logical Drive RAID 60 Logical Drives Similar to a RAID 50 logical drive (see page 158), a RAID 60 logical drive—also referred to as dual drive failure protection— is built from at least eight disk drives configured as two or more RAID 6 logical drives, and stripes stored data and two sets of parity data across all disk drives in both RAID 6 logical drives. Two sets of parity data provide enhanced data protection, and striping improves performance. RAID 60 logical drives also provide high data transfer speeds. Quick Answers to Common Questions... C In this appendix... How do I...? ........................................................................................................................... 161 What’s the difference between...? ......................................................................................... 163 What options are on the Actions menu? ............................................................................. 163 What tasks can be scheduled to run at a specified time?.................................................... 166 This chapter provides quick references to frequently requested information about basic tasks, functions, and concepts in Adaptec Storage Manager. Note: For troubleshooting tips, see Solving Problems on page 134. Appendix C: Quick Answers to Common Questions... . 161 How do I...? Set up my storage space? Follow the five steps in the Getting Started Checklist on page 14. Create or add a new logical drive? In the Enterprise View, right-click the controller you want, then click Create logical device. Or, click either of the buttons shown at right. or See Building Your Storage Space on page 25. Open the Configuration wizard? In the Enterprise View, right-click the controller you want, then click Create logical device. Or, click either of the buttons shown at right. or See Building Your Storage Space on page 25. Turn off the alarm? Click the Silence button, shown at right. Or, from the menu bar, click Actions, select Agent actions, select Alarm actions, then click Silence alarm. See If your enclosure does not have an enclosure management device, the status icons appear but do not indicate status. on page 105. Add a new user to Adaptec Storage Manager? Any user with a valid network user name and password can log into Adaptec Storage Manager. See Starting and Logging In on the Local System on page 27 and Understanding Permission Levels on page 27. Add a remote system? Click the Add button, shown at right. See Logging into Remote Systems from the Local System on page 32. Prevent a user from changing my storage space? See Understanding Permission Levels on page 27 for information on restricting access. Check disk drive or logical drive status? Hold your cursor o...
Other models in this manual:Other - Adaptec RAID 5805 (2.09 mb)
Other - Adaptec RAID 5445Z (2.09 mb)