Votes - 5, Average rating: 3.6 ( )

Manafacture: Hitachi File size: 2.79 mb File name: Language of manual:

User Logo Enables the user to define his/her own logo screen that will display during strat-up. Three modes are available: Default (LG logo), black screen and blue screen. Economic Mode Selects Economic mode to lower brightness and extend the lamp life. Reset Returns all settings to their factory preset values. Lamp Hour Shows lamp usage time. DLP Personal Projector 21 5. PIP Menu These functions are available only when the input mode is Analog RGB and the PIP source is Video or S-Video. FUNCTION DESCRIPTION PIP Source Selects the source for the PIP. PIP Size Enables use of the 3 / 4key to scroll through the four alternatives: Off, Small, Medium, Large. PIP Position Selects a desired position for the PIP. H Position Adjusts the horizontal position of the PIP image. V Position Adjusts the vertical position of the PIP image. More Options Enables use of the 3 / 4key to select more PIP functions including Brightness, Contrast, Color, Tint, Sharpness and System. Brightness Adjusts the brightness of the PIP image. Contrast Adjusts the degree of difference between dark and light for the PIP image. Color Increases or decreases the color range (R, G, B) of the image. Tint Adjusts the image to make it appear more red or green. Sharpness Adjusts the image to make it appear sharper or softer. System Shows PIP image systems: NTSC, PAL, SECAM. The input System cannot be changed by selection. 22 DLP Personal Projector DLP Personal Projector 23 Shutdown 1. Press and hold POWER and a warning message will appear. To turn off the projector, press and hold POWER again. 2. The fan will continue to run for approximately 90 seconds. 3. Turn off the main power switch. * After the projector is turned off, there is a 90-second cooling period before the projector can be re-started. AUTO BLANK SOURCE KEYSTONE - KEYSTONE + POWER MENU /EXIT 4. Disconnect the power cord from the wall socket. (220V) (110V) Caution • Please do not unplug the power cord before POWER is shut down or during the two-minute cooling process. • If the projector is not properly shut down, to protect the lamp, the system will detect this and cool the lamp for 90 seconds automatically before turning on again. 24 DLP Personal Projector MAINTENANCE Lamp Information Use and Replacement of the Lamp The lamp life is 1500 hours. When the Lamp Indicator lights up orange suggesting the time of lamp replacement, please install a new lamp or consult your dealer. An old lamp could cause a malfunction in the projector and in rare instances may even explode. Lamp Replacement Please check with LG service center for the information of lamp replacement. Caution HIGH VOLTAGE/ HIGH TEMPERATURE/ HIGH PRESS WHEN REPLACING THE LAMP, TURN OFF THE PROJECTOR AND PULL OUT THE CORD FROM THE RECEPTACLE BEFORE REPLACING THE LAMP. WAIT UNTIL THE LAMP BECOMES COOL (MINIMUM 45 MINUTES). TOUCHING THE LAMP WHEN IT IS HOT MAY CAUSE A BURN ON YOUR HAND. A HIGH-PRESSURE LAMP WHICH WHEN HOT, MAY EXPL...

Download now

Please, enter two numbers from picture: