Votes - 3, Average rating: 4.3
(
)
)
|
manual abstract
The output of the green tube is stationary. The outputs of the red and blue tubes can be adjusted. When properly aligned, the outputs of all three tubes should be directly over each other to produce the white lines. To simplify convergence, HITACHI incorporates a function called MAGIC FOCUS located on the front control panel, which allows the TV to self-adjust. Press this MAGIC FOCUS button and the convergence self adjustment will start and this process will take approximately 20 seconds. If this button is pressed during this process, no change in picture quality will occur. After this 20 second self-adjust period, picture quality will be optimum. (Do not move the TV during self-adjust.) MAGIC FOCUS MAGIC FOCUS NOTES: Only a momentary press of the MAGIC FOCUS button is necessary to start AUTO DIGITAL CONVERGENCE. At any time during this convergence correction process, you may press the MAGIC FOCUS button to exit the MAGIC FOCUS mode. However, the convergence correction process needs to be completed to SAVE the new corrected convergence data. You may also select Magic Focus from the SETUP menu. Video Audio Ch. Manager Locks Setup MENU CURSOR Move SEL Sel Setup Magic Focus Menu Preference Set The Clock Set The Channels Set The Inputs Set Event Timer Set Closed Captions About Your TV Move SEL Return MAGIC FOCUS CURSOR Setup Magic Focus Aligns the Red, Green, and Blue colors to correct for Magnetic Influences. Adjustment Mode Auto Manual If you want to adjust now Start Move SEL Return 47 ON-SCREEN DISPLAY SETUP Manual Convergence Adjustment Mode NOTES: 1. Please turn ON your television for at least 20 minutes before using this feature. 2. Auto Adjustment Mode is recommended. If convergence is still not acceptable, use the Manual Adjustment Mode. DO NOT press MAGIC FOCUS or use Auto Adjustment Mode after using Manual Adjustment Mode. ON-SCREEN DISPLAY Using the Remote Control, select VIDEO-MAGIC FOCUS-MANUAL ADJUSTMENT MODE-START to access convergence crosshatch pattern. The adjustment point is indicated by the Adjustment Point Cursor. To Move Adjustment Point To move the Adjustment Point Cursor, use the CURSOR buttons. The Adjustment Point Cursor must be WHITE. Another way to move the Adjustment Point Cursor is to press the followiing buttons: [2] up, [4] left, [5] down, [6] right. If you use the number buttons while the adjustment point is WHITE, it will change to RED. To Change the Color of Adjustment Point Press the SELECT button repeatedly (WHITE-RED-BLUE-WHITE...). Green color is fixed and cannot be adjusted. To Adjust the Convergence Move the Adjustment Cursor to the point to be adjusted. Use the CURSOR , , , to match the RED and BLUE colors to GREEN (reference color). Properly aligned, all three colors should appear white. Setup Locks Ch. Manager Audio Video Move SEL Sel Magic Focus Setup Move SEL Return Aligns the Red, Green, and Blue colors to correct for Magnetic Influences. Auto Manual Adjustment Mode If you want to adjust now Start CURSOR CURSOR Set The Channels Set The Clock Menu Preference Setup Set The Inputs Move SEL Return Set Event Timer Set Closed Captions About Your TV Magic Focus MENU Adjustment Point Cursor If convergence is acceptable after Manual Convergence adjustment, press EXIT button to access menu mode. EXIT DONE : [1] CANCEL : [2] INI. RESET : [3] BACK : [4] Press the [1] button on the remote control to SAVE adjusted data and return to main picture. Press the [2] button on the remote control to CANCEL adjusted data and return to main picture. Press the [3] button on the remote control to recall the factory pre-set convergence data. Press the [4] button on the remote control to return to the manual convergence adjustment mode (crosshatch pattern). Press the [9] button on the remote control to read the SAVED adjusted data. If there is no saved data, pressing the [9] button will recall the factory pre-set data. 48 SETUP Menu Preference This feature will allow you to select any one of three different languages for all on-screen displays. MENU CURSOR Setup Magic Focus Menu Preference Set The Clock Set The Channels Set The Inputs Set Event Timer Set Closed Captions About Your TV Move SEL Return CURSOR Setup Menu Preferences Set The Language English Francais Espanol Set The Menu Background Shaded Solid Move SEL Return CURSOR Setup Menu Preferences Set The Language English Francais Espanol Set The Menu Background Shaded Solid Move SEL Select Use CURSOR , to highlight the language of your choice. Press SELECT to select the highlighted language. Press EXIT to quit menu or select MENU PREFERENCE to return to previous menu. 49 ON-SCREEN DISPLAY SETUP Set The Menu Background This function allows you to choose from two menu backgrounds. ON-SCREEN DISPLAY CURSOR Setup Menu Preferences Set The Language English Francais Espanol Set The Menu Background Shaded Solid Move SEL Select Use CURSOR , to highlight SET THE MENU BACKGROUND (shaded or solid), and press the SELECT button to select setting....