Votes - 4, Average rating: 4.8
(
)
)
|
manual abstract
Press F.FWD/B or REW/s to select [TV] or [TAPE]. If you select TV, the current TV channel will be on when the TV/VCR turns on. Select TAPE to start tape playback when the TV/VCR turns on. WAKE UP ON/OFF [ON] TIMER B TV/TAPE TIME [12:OOAM] 3 3 Press PLAY/ or STOP/ to select TIME. Press F.FWD/B or REW/s to select your desired wake up time. Each button press will increase (or decrease) the time by 10 minutes. WAKE UP ON/OFF [ON] TIMER TV/TAPE [TV] B TIME [12:OOAM] 4 4 Press MENU to remove the menu, then press POWER to turn off the TV/VCR. The TV/VCR will turn on at the specified time. Helpful Hint • To cancel the Wake Up Timer, press SLEEP/WAKE UP until WAKE UP TIMER appears, then press F.FWD/B or REW/s until [OFF] appears. MC09D5MG 4/12/02 12:20 PM Page 37 Automatic Operation Features 37 The following playback features will always operate. Automatic Playback When you put a tape in the TV/VCR, the power will come on automatically. If the tape’s record tab is missing, playback will begin. If a timer recording is set, the power will not come on automatically when you insert a tape with the record tab intact. If a timer recording is set and the TV/VCR power is off, the TV/VCR will eject the tape if the record tab is missing. Automatic Rewind, Eject, Off When you play, fast forward, or record a tape to its end, the TV/VCR will rewind the tape, stop, turn itself off, and eject the tape. Tape Eject A tape can be ejected with the TV/VCR power on or off (but the TV/VCR must be plugged in). If a timer recording is programmed, a tape cannot be ejected when the power is off. Turn on the TV/VCR power, then eject the tape. Be sure to insert a tape and turn off the TV/VCR power for the timer recording. Automatic Tracking Adjustment The TV/VCR automatically adjusts the tracking to give you the best possible picture quality. With some recordings, however, you may get a better picture using the manual tracking controls (see below). Manual Tracking To adjust the tracking manually, press the CHANNEL / buttons on the TV/VCR or the CH(annel) / button on the remote control during playback. Tracking returns to Automatic Tracking Adjustment when a tape is inserted or when the STOP/ button is pressed. Before Tracking Adjustment After Tracking Adjustment MC09D5MG 4/12/02 12:20 PM Page 38 38 Helpful Hints If you are having problems with your product, check this list of problems and possible solutions before requesting service. You may be able to solve the problem yourself. If you need to call a customer service representative, please know the model number and serial number of your product before you call. This information is on the back of the product. Also, please take a moment to identify the problem you are having, and be prepared to explain this to the representative. If the representative will need to help you with operations, please stay near the product. Our representatives will be happy to assist you. Location For safe operation and satisfactory performance of your TV/VCR, remember the following: • Shield it from direct sunlight and keep it away from sources of intense heat. • Avoid dusty or humid places. • Avoid places with insufficient ventilation. Do not block the ventilation openings at the top and bottom of the TV/VCR. Do not place the TV/VCR on a carpet, as this will block the ventilation openings. • Avoid locations subject to strong vibrations. • Do not place the TV/VCR near strong magnetic fields. • Do not move the TV/VCR from a cold place to a hot place, or vice versa. • Do not use this TV/VCR under high temperature conditions (maximum operating temperature: 104°F). Electrical Shock and Fire Hazards • Do not handle the power cord with wet hands. • Do not pull the power cord when disconnecting the TV/VCR from the AC (alternating current) wall outlet. Grasp it by the plug. • If you spill water on the TV/VCR, unplug the power cord immediately and take the TV/VCR to an authorized service center. • Do not put your fingers or objects into the TV/VCR cassette compartment. • Do not place anything on top of the TV/VCR. Dew Warning (Moisture Condensation) • Moisture may condense inside the unit when you move it from a cold place to a warm place, after heating a cold room, or when the humidity is high. There is no warning that moisture is in your TV/VCR. Playing a tape in a TV/VCR in which moisture has accumulated could damage the tape and the TV/VCR. If you suspect moisture inside the TV/VCR, keep the TV/VCR power on (but do not play a tape) for at least two hours. This will allow the TV/VCR to dry. TV/VCR will not perform a timer recording. • Set the recording start and stop times correctly. Details are on pages 26-28. Midnight is 12 a.m. Noon is 12 p.m. • Make sure the TV/VCR power is off. • Set the clock. Details are on pages 12-15. • Put a tape in the TV/VCR. The tape must have a record tab. • With ShowGuard, you don’t have to worry about losing your timer recordings. If the power fails, timer recordings will be restored when...