Votes - 5, Average rating: 3.8 ( )

Manafacture: Samsung File size: 18.57 mb File name: Language of manual:

In this case, please change the AP settings and try again. If your Internet service provider has registered the MAC address of the device used to connect to the Internet for the first time and authenticates the MAC address each time you connect to the Internet, your TV may not be able to connect to the Internet as the MAC address differs from that of the device (PC). In this case, ask your Internet service provider about the procedures to connect devices other than your PC (such as your TV) to the Internet. If you cannot connect to the Internet even if you have followed the procedures of your Internet service provider, please contact a Samsung Electronics. • Select a network - Access Point: You can select the IP sharer to use when using a wireless network. N If a wireless Access Point is not in the Access Point list, press the Red button. N When the connection is made, you will be returned to the screen automatically. N If you have selected an Access Point with a security authentication: The Security Key input screen appears. Enter the security key and press the Blue button on the remote control. N If security encryption type is WEP, 0~9, A~F will be available when you input security key. Connecting WPS (Wi-Fi Protected Setup) • If Security Key is already set: In access point list, select WPS. N You can select PBC, PIN, Security Key. - Connecting by using PBC: Select a PBC (Push Button Configuration). Press the PBC button on the AP (access point) within 2minutes, and wait for connection. - Connecting by using PIN: Select a PIN (Personal Identification Number). N The message showing the PIN Code is displayed. Input the PIN Code at AP device within 2minutes. Select OK and wait for connection. N Try again if connecting operation doesn't work N When the connection is not established although tried again, reset the access point. Please refer to a manual of each access point. - Connecting by using Security Key: When selecting Security Key, the input window is displayed. Input the security key and press Blue button. N Try again if connecting operation doesn't work. • If Security Key is not set: When the security setting of AP that supports WPS is NONE, you can select PBC, PIN, None Security. None Security is capable of connecting to AP directly without using WPS function. N Process of PBC, PIN is same as above. Refer to if Security Key is already set. N Try again if connecting operation doesn't work. Wireless Network Setup Select a network 3/9 sson |jee Search |AP_1 A Ad-hoc |Ap_2 U Move E Enter R Return PBC PIN None Security Wireless Network Setup Security Key [I Number E Enter R Return Press OK After input TV's Pin code in the access point's setup. Access Point Name : AP_1 PIN Code : 12345678 [ OK ] Cancel im^ Wireless Network Setup Select a network sson PBC jee PIN Security Key Search ^Ad-hoc AP_1 Ap_2 U Move E Enter R Return Press the PBC button on the access point. Access Point Name : AP_1 Cancel ) Wireless Network Setup Security Key rT~ rT C D E F 6 O Move Number E Enter R Return English - 30 - Ad-hoc: You can connect to a mobile device without an access point through the ‘Samsung Wireless LAN Adapter' by using a peer to peer network. How to connect to new Ad-hoc 1. Choose Select a network, then a device list is displayed. 2. While in the device list, press the Blue button on the remote or select Ad-hoc. N The message The existing network system may have limited functionality. Do you want to change the network connection? is displayed. 3. Input the generated Network Name(SSID) and Security Key into the device you want to connect. How to connect an existing Ad-hoc device 1. Choose Select a network, the device list is displayed. 2. Select the device you want in the Device list. 3. If security key was applied, input the security key again. N If network doesn't operate normally, please check the Network Name(SSID) and Security Key again. If the Security Key is incorrect, it may be the reason for the malfunction. Wireless Network Setup-Auto If you want to connect AP, AP should support DHCP Only devices which support Ad-hoc mode can be connected without DHCP. 1. Set Network Type to Wireless. 2. Select Wireless Network Setup. 3. Set Internet Protocol Setup to Auto. N The Internet Protocol is set automatically. 4. Select a network through Select a network. 5. Select Network Test to check the network connectivity. Wireless Network Setup-Manual 1. Set Network Type to Wireless. 2. Select Wireless Network Setup. 3. Set Internet Protocol Setup to Manual. 4. Set up IP Address, Subnet Mask, Gateway and DNS Server. N Press the number buttons on the remote control when you set the Network manually. 5. Select a network through Select a network. 6. Select Network Test to check the network connectivity. The existing network system may have limited functionality. Do you want to change the network connection? [ Yes ] English - 31 INPUT / SUPPORT |...

Download now

Please, enter two numbers from picture: