Login:
Votes - 3, Average rating: 3 ( )

User manual Kenmore, model 110.8587#

Manafacture: Kenmore
File size: 4.22 mb
File name:
Language of manual:enes
Free link for this manual available at the bottom of the page



manual abstract


When a Manual Cycle is selected, the Estimated Time Remaining display shows the actual time remaining in your cycle. You can change the actual time in the cycle by pressing More Time or Less Time. See "Changing Cycles, Options and Modifiers." Timed Dry Use this cycle to complete drying if items are still damp after an Auto Dry Cycle. Timed Dry is also useful for drying heavyweight and bulky items, such as bedspreads and work clothes. Lightweight garments, such as exercise wear, can be dried using Timed Dry on a low temperature setting. EXPRESS DRY TM Use this cycle for drying small loads or loads that need a short drying time. Touch Up Use this cycle to help smooth out wrinkles from items, such as clothes packed in a suitcase or items wrinkled from being left in the dryer too long. Manual Preset Cycle Settings Manual Cycles Temperature Default Time Load Type (Minutes) TIMED DRY High 40 Heavyweight, bulk, bedspreads, work clothes EXPRESS DRY TM High 27 Small loads TOUCH UP Medium High 20 Remove wrinkles You can customize your cycles by selecting options. @ DAMP%AL DRY (Au/o CYCLESO"zvi Damp Dry Signal Select the Damp Dry Signal to alert you that your clothes are approximately 80% dry. This is useful when you want to remove lightweight items in a mixed load to avoid overdrying or remove _55555S partially dry items that may need ironing. The Damp Dry Signal is useful when drying bedsheets/linens in a mixed load or large items in the "Bulky/Bedding" cycle. When the signal goes off, open the door to stop the dryer, rearrange the load inside the dryer, close the door and restart the dryer to finish the drying cycle. Rearranging the load will aid in the drying process. For the "Bulky/Bedding" cycle, the Damp Dry Signal is preset to ON. NOTE: The Damp Dry Signal is available only with the Auto Dry Cycles. WRINKLE GUARD _ WRINKLE GUARD ®helps smooth out wrinkles that form when you cannot unload the dryer promptly at the end of a cycle. During this option, the dryer stops tumbling and then tumbles again for a brief period. • Press WRINKLE GUARD ®to get up to 21/2hours of heat-free, periodic tumbling at the end of a cycle. • Stop WRINKLE GUARD _ at any time by pressing WRINKLE GUARD ®or opening the dryer door. • For the Casual Auto Dry Cycle, WRINKLE GUARD ®is preset to ON. The other Auto Dry Cycles will retain the WRINKLE GUARD ®setting. For example, if you select WRINKLE GUARD ®in the Normal cycle, WRINKLE GUARD _ will be on the next time you select the Normal cycle. NOTE: If you do not select WRINKLE GUARD _, the dryer stops after cool down. 23 Use Modifiers to select temperatures for the Manual Cycles. Press Temperature until the desired temperature setting glows. Temperature modifiers cannot be used with the Auto Dry Cycles. • HUGH 0 MEDIUM HIGH 0 MEDUUM O LOW @ EXTRA LOW @ AURDRY C) TEMPERATURE /MANUAL CYCLES ONLY) Air Dry Use the Air Dry Modifier for items that require drying without heat such as rubber, plastic and heat-sensitive fabrics. This table shows examples of items that can be dried using Air Dry. Type of Load Time* (Minutes) Foam rubber -pillows, padded bras, stuffed toys 20 -30 Plastic -Shower curtains, tablecloths 20 -30 Rubber-backed rugs 40 -50 Olefin, polypropylene, sheer nylon 10 -20 * Reset cycle to complete drying, if needed. When using Air Dry • Check to see that coverings are securely stitched. • Shake and fluff pillows by hand periodically during the cycle. • Dry item completely. Foam rubber pillows are slow to dry. NOTE: Air Dry is not available with Auto Dry Cycles. You can change Auto Dry and Manual Cycles, Options and Modifiers anytime before pressing Start. • Three short tones sound if an unavailable combination is selected. The last selection will not be accepted. Changing Cycles after pressing Start 1. Press PAUSE/CANCEL twice. 2. Select the desired cycle and options. 3. Press and hold START. The dryer starts at the beginning of the new cycle. NOTE: If you do not press Start within 5 minutes of selecting the cycle, the dryer automatically shuts off. Changing Options and Modifiers after pressing Start You can change an Option or Modifier anytime before the selected Option or Modifier begins. 1. Press PAUSE/CANCEL once. 2. Select the new Option and/or Modifiers. 3. Press and hold START to continue the cycle. NOTE: If you happen to press PAUSE/CANCEL twice, the program clears and your dryer shuts down. Restart the selection process. End of Cycle Signal The End of Cycle Signal produces an audible sound when the drying cycle is finished. Promptly removing clothes at the end of the cycle reduces wrinkling. @ HUGH @ LOW @ OFF END of CYCLE S_GNAL Press END of CYCLE SIGNAL to adjust the sound level or turn off the signal. NOTE: When WRINKLE GUARD ® is selected and the End of Cycle Signal is on, a tone sounds every 5 minutes until the clothes are removed, or WRINKLE GUARD ®ends. :::: : The dryer rack is shipped in place in your dryer. Remove and discard any packing material before use. Use the...

Other models in this manual:
Dryers - 110.8508# (4.22 mb)
Dryers - 110.8509# (4.22 mb)
Dryers - 110.8586# (4.22 mb)

Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category