Login:
Sorted: Name ↓   Downloads   Rate   Size ↑  
downloaded: 1   File size: 190 kb   Manafacture: Stiga  
Category: Snow Blowers
@name

The chute can manually be adjusted both horizontally and vertically. Self-propelled with one speed forward. Working width 56 cm. SNOW FALL 18-2828-26 January 3, 2006 Snow Fall (18-2828-26) ENGINE Brand Tecumseh Snow King OHV Power 5,0 Hp/3,7 kW FUEL Type of fuel Unleaded Tank volume 1,9 l SPEED CONTROL Number of gears 1 forward WHEELS Type of wheels Snow Hog tyres Wheel size 25 x 10 cm Bearings Brassbearing Driving 1 speed forward Snow chains Not available VIBRATIONS & SOU

downloaded: 0   File size: 280 kb   Manafacture: Stiga  
Category: Snow Blowers
@name

They are there to remind you of the care and attention required in use. This is what the symbols mean: Warning. If the regulations are not followed, there is a risk of danger to life and machine breakdown. Read the owner’s manual before operating the machine. Keep bystanders at a safe distance from the machine. Warning of hard objects flying off. The power supply must be disconnected before carrying out cleaning or maintenance. Shut off the motor before unclogging the discharge shute. The electr

downloaded: 3   File size: 159 kb   Manafacture: Stiga  
Category: Snow Blowers
@name

Equipped with a powerful dual-stage system. The snow is first collected with a saw-toothed spiral and then practically ejected about 12 metres with a fan. The machine is designed for users with high demands. The machine has electric start, integrated halogen light, differential and fuel gauge. Direction and height of ejector is quickly adjusted from the handle. The comfortable handle can be operated with one hand only. Snow chains are available as accessory. Equipped with a low-vibrating 13,0

downloaded: 3   File size: 159 kb   Manafacture: Stiga  
Category: Snow Blowers
@name

mission Friction disc Blocage de différentiel Differential on driving axle Nombre de rapports 6 forward, 2 reverse ROUES Type de roues Maxi-grip tyres Dimension de roues 40 x 17 cm Roulements Ball bearings Chaînes de roues Accessory VIBRATIONS & NIVEAU DE BRUIT Niveau de puissance accoustique 108 dB(A) Vibrations 10,5 m/s2 COMMANDES Démarrage électrique Yes, 230 V Phare Integrated halogen light Guidon Yes Starter Manual Type de contacteur Plastic key Levier d'accélérateur Yes

downloaded: 0   File size: 279 kb   Manafacture: Stiga  
Category: Snow Blowers
@name

Connector (3) – For electrical connection. Cable support (4) – For supporting the connection cable. Deflector lock (5) – Locks the deflector in position. Direction lever (6)– Changes the direction of the discharge chute. Discharge chute (A) – Ejects the snow. Deflector (B) – Determines the distance the snow is thrown. 5 USING THE MACHINE 5.1 GENERAL Never start the engine until all the above measures under ‘ASSEMBLY’ have been carried out. Never use the snow thrower without first reading and und

downloaded: 0   File size: 461 kb   Manafacture: Stiga  
Category: Snow Blowers
@name

Lubriplate. 8 SERVICE AND REPAIRS 8.1 Adjusting cable (Breeze) The auger drive lever’s cable is adjusted at the factory. Any adjustment is carried out as follows: 1. Unhook the cable at the auger drive lever (5:M). 2. Remove the casing and disconnect the cable from the appropriate hole in the plate. See figure 12. 3. Reinstall the cable in the new hole as required. Replace the casing, hook the cable onto the auger drive lever. ENGLISHEN ENGLISHEN 4. Start the snow thrower and check operation. Th

downloaded: 3   File size: 461 kb   Manafacture: Stiga  
Category: Snow Blowers
@name

5.4.1 Starting the engine from cold, Snow Rex 1. Fill the fuel tank with petrol. See previous section. 2. Check that the auger drive lever (9:M) is disconnected. 3. Activate the choke (9:R). 4. Set the stop control (9:N) in the ON position. 5. Press in the primer (6, 9:O) as follows: Above 10°C: Do not press. Between -10 and +10°C: Press twice. Below -10°C: Press 4 times. Lift your finger from the primer between each press. 7. Manual starter: Pull sharply on the recoil starter cord’shandle (9:Q)

downloaded: 2   File size: 513 kb   Manafacture: Stiga  
Category: Snow Blowers
@name

+46 (0)140-677 00 GLOBAL GARDEN PRODUCTS PARK viLLA 12/14/16 estate RANGE IMPLEMENTS rac quick connection rear rake tool 130/ rear tool lift 3000 Tow rake estate front weight/ frame weight REAR RAKE RooL 100 REAR WEiGHT EsTATE /TIG* SNOW THROWERS We love snow. So will you, no doubt, if you let our snow throwers do the back-bending job. Our mission is to help nature along and rearrange the drifts to where you want them. The idea is for you to spend less time on the drive and more on t

downloaded: 0   File size: 513 kb   Manafacture: Stiga  
Category: Snow Blowers
@name

Note the adjustable discharge chute, which enables you to control where you relocate the snow. One hand grip and adjustable skid shoes (no bending required) are also included as standard on all Duo Line throwers. standard on the Duo Line range: Breaks through snowdrifts • Vertically and laterally adjustable discharge chute • One hand grip • Adjustable skid shoes -CD snow BLiZZARD/18-2830-29 snow crystal/18-2814-29 snow CUBE/18-2803-29 snow sPARK/18-2857-29 compact line These easy-to-hand

downloaded: 3   File size: 513 kb   Manafacture: Stiga  
Category: Snow Blowers
@name

They are best for use on asphalt and other hard surfaces and are also a good environmentally-friendly choice. They are easy to transport and store thanks to their compact shape and folding handle. standard on the Compact Line range: Vertically and laterally adjustable discharge chute Durable, rubber coated augers snow frost Rs/18-2811-29 snow FRosT Es/18-2812-29 snow REX/18-2818-29 snow ELECTRiC 2000/18-2806-29 snow ELECTRiC/18-2807-29





Category