Press: • Body - 1 color, 2-sided • Cover - 1 color, 1 sided Bindery: • Saddle stitch, face trim *if too thick for saddle stitch, tape bind Covers: • FRONT COVER is present at the beginning of the file. • BACK COVER is the page immediately after the front cover. • The part number for this manual (typically a 172_____ number) is located on the front cover. • This file may contain several manual which differ only by their covers. See the part number at the bottom of the cover page. . Body: • The bo

4. Fully press and hold the traction & Free-Hand™ Control lever (B, Figure 2) on the left-hand grip to engage the traction drive and begin moving the snowthrower. To disengage the traction drive, completely release the lever. 5. When BOTH levers are depressed, the Free-Hand™ Control is activated. This allows Auger Engage Control to be released — YET AUGER ROTATION WILL CONTINUE — until the Free-Hand™ Control is released. 6. Select forward or reverse speeds as needed using the Speed Selector (A,

Do not operate the machine without the clean-out tool properly stored on the handle. 3. Check the engine oil level. See your engine owner’s manual for procedure and specifications. 4. Check to make sure spark plug wire is attached and spark plug is tightened securely. If necessary, torque spark plug to 15 ft. lbs. 5. Check the fuel supply. Fill the tank no closer than 1/4 to 1/2 inch of top of tank to provide space for expansion. See your engine owner’s manual for fuel recommendations. 6. Ch

+ See your engine Owner’s Manual. ***Lubricate each fall and spring. CHECKING TIRE PRESSURE The air pressure in each tire (Figure 8) should be equal for both tires for best performance. Be sure to keep caps on valves to prevent entry of debris into the valve stem when tires are filled. Size PSI bar 15x5.0-6 20 1,38 4.80-8 20 1,38 16 x 6.5-8 14 ,96 AUGER GEAR CASE LUBRICATION 1. Place the snowthrower on a level surface. 2. Remove the pipe plug (A, Figure 9). 3. Check the lubricant lev

Open the outside doors; exhaust fumes are dangerous. 8. Exercise extreme caution when operating on slopes. Do not attempt to clear steep slopes. 9. Never operate the snowthrower without proper guards plates, or other safety protective devices in place and working. 10. Never direct the discharge toward people or areas where property damage can occur. Keep children and others away. 11. Do not overload the machine capacity by attempting to clear snow at too fast a rate. 12. Never operate the m

Once the engine is warm and running smoothly, the choke knob should be set to the off position to provide a normal air/fuel mix. STARTING THE ENGINE 1. Turn the fuel valve (located below the fuel tank) to the ON position. 2. Insert the engine key (F, Figure 1) into the engine key slot and push fully in to the RUN position. 3. Move the throttle lever (E) fully up to the FAST position. Figures 1. Engine Controls A. Electric Start Button B. Fuel Valve C. Starter Handle D. Primer Button E.

Sound Power in Decibels J. Sound Pressure at Operator’s Position in Decibels K. Vibration This unit complies with ISO 8437, European Machinery Directive 98/37/EC, and European EMC Directive 89/336/EC. PRODUCT REFERENCE DATA Model Description Name/Number Unit MFG Number Unit SERIAL Number Mower Deck MFG Number Mower Deck SERIAL Number Dealer Name Date Purchased ENGINE REFERENCE DATA 1 Engine Make Engine Model Engine Type/Spec Engine Code/Serial Number Mfg. No.: 269XXXX Serial No.:

Grease Tube Tire Sealant Degrimer/Degreaser Gas Stabilizer Additional copies of this manual are available, as well as fully illustrated parts lists. These manuals show all of the product’s components in exploded views (3D illustrations which show the relationship of parts and how they go together) as well as part numbers and quantities used. Important assembly notes and torque values are also included. For applicable manuals currently available for your model, contact our Customer Publication

Before starting the engine let’s learn how you can use these controls ail within easy reach to SIMPLIFY your snow moving problem. You are safely behind the handles away from all moving parts even for starting. Your Sno-Away is one of the very few snow throwers with this convenience and safety. (The numbers on the figure correspond to the paragraph numbers below), 1. THE ENGINE SPEED CONTROL - is the most convenient way to control throwing distance - it is at your finger tips. It also can be use

• Slide the rubber dust cover (F) over the plastic fitting (B). 2 3 8 Figure 7 TP 1000-4518-01-LW-S Form No. 173xxxx-00 Two-Stage Snowthrower 1694986 10530L, 10.5 Snowthrower B A A C D B D Figure 3 A B C A B C D A B D E C D B A A B Remove Snowthrower From Crate • Cut the two zip ties from between wheels and the wood pallet. • Remove screws (A, Figure 11) from both skid shoes (B). • Roll snowthrower off crate. Add Oil and Fuel Note: Engine is NOT shipped with oil. Add 5W-30 premium engine oil. Se