The break away feature will help prevent damage to the downrigger and boat in the event that the downrigger boom or ball would strike an object. If this should occur, the mounting plate of the swivel pedestal will turn, giving way to the unexpected load. The mounting plate can be reset back to any position by following these steps: 1) Locate the 3/8” bolts on the bottom of the top plate (See Figure 1). 2) With the pedestal locked in any position, loosen the bolts 3) Rotate the mounting plate bac

RETAIN FOR FUTURE REFERENCE. NOTE: Do not return your CANNON accessory to your retailer. Your retailer is not authorized to repair or replace this unit. You may obtain service by: • calling CANNON at 1-800-227-6433; • returning your accessory to the Factory Service Center; 121 Power Drive, Mankato, MN 56001 Please include proof of purchase and purchase date for warranty service with any of the above options. Owner’s Manual 1904030 1904031 1904032 1904033 Pedestal Mount Models & Features 1904030

Available in 6, 12, 18, 24, and 36 inch lengths. Mounting to Cannon Deck Mount The Cannon Deck Mount works great for adding stability and easy removal of your pedestal mount. With your Cannon Deck Mount installed on your boat, attach your pedestal mount by removing the thumb screws and fastening the pedestal base to the plate with four 1/4”-20 x 3/8” long flat head screws. 1904000 Deck Mount The Cannon Deck Mount plate is a four inch by three inch clear anodized aluminum plate which allows the h

Within the warranty period, Johnson Outdoors Inc. will, at its option, either repair or replace same without charge (but no cash refunds will be made). The unit must be returned, prepaid and with proof of the date of purchase to the following: . Johnson Outdoors, Inc Cannon Division, 121 Power Drive, Mankato, MN 56001 This limited warranty may be enforced only by the original purchaser; all subsequent purchasers acquire the product "as is" without any benefit of this limited warranty. Repair or

stop, tail, turn, and clearance • Crossmembers - 3” channel • Elec. plug - 7-way RV • Fenders - 10”x72” diamond plate with backs • Paint - high solids acrylic enamel • Tongue - 6” channel wrap around • Ramps - 4’ fold down • Bed witdth - 81” • Sealed modular wiring harness Standard Features Optional Features • 16” white spoke • Steel deck • Pressure treated decking • 48” split gate • Light protectors • Self cleaning dovetail • Electric breakaway • D-Rings • E-Z Lube axles Dimensio

Pistol grip release provides quick one hand up and down angle adjustment with 360 ° rotation with the push of the release button. Ratcheting adjustment system allows you to pull the rod holder straight up for rod removal. Clear anodized aluminum is used for strength and corrosion resistance and a UV resistant cap protects the finish of the rod and reel. This Adjustable Rod Holder is compatible with Cannon, Bert’s, and Traxstech track systems. 1907022 Adjustable – Downrigger Mount Rod Holder - Me

NOTE: Do not return your CANNON accessory to your retailer. Your retailer is not authorized to repair or replace this unit. You may obtain service by: • calling CANNON at 1-800-227-6433; • returning your accessory to the Factory Service Center; 121 Power Drive, Mankato, MN 56001 Please include proof of purchase and purchase date for warranty service with any of the above options. Adjustable Dual Axis Rod Holder Shown Owner’s Manual TROLLING SYSTEM Rod Holders: ANGLED FIXED MOUNT Adjustable Singl

1904020 Clamp Mount Cannon Rail Mounts allow for the mounting of Cannon single and dual axis rod holders to any transom or allowable clamping edge. Clamp opens to two and a half inches and is made from clear anodized aluminum and stainless steel for strength and corrosion resistance. 1904000 Deck Mount The Cannon Deck Mount plate is a four inch by three inch clear anodized aluminum plate which allows the hard mounting of Cannon Dual Axis Rod Holders. The plate comes with a black protective mount

Bearing system ensures smooth swivel action even while a downrigger weight is attached. Components are made from clear anodized aluminum and stainless steel for strength and corrosion resistance. The swivel base downrigger pedestals are compatible with Cannon, Bert’s, and Traxstech track systems. Available in 4” and 6” heights. Rod Holder \ Accessory Compatibility Mounts Rod Holde r Track Mount Gimbal Track Mount Pedestal Track Mount Rail Mount Clamp Mount Deck Mount Angled Fixed Mount . . . 0 0

warrants to the original purchaser that the accompanying product (see exclusions below) is free from defects in material or workmanship for a period of one (1) year from the date of purchase. Within the warranty period, Johnson Outdoors Inc. will, at its option, either repair or replace same without charge (but no cash refunds will be made). The unit must be returned, prepaid and with proof of the date of purchase to the following: . Johnson Outdoors, Inc Cannon Division, 121 Power Drive, Mankat