Votes - 4, Average rating: 4 ( )

Manafacture: Cannon File size: 143.8 kb File name: Language of manual:

The break away feature will help prevent damage to the downrigger and boat in the event that the downrigger boom or ball would strike an object. If this should occur, the mounting plate of the swivel pedestal will turn, giving way to the unexpected load. The mounting plate can be reset back to any position by following these steps: 1) Locate the 3/8” bolts on the bottom of the top plate (See Figure 1). 2) With the pedestal locked in any position, loosen the bolts 3) Rotate the mounting plate back to the desired position. 4) Tighten the 3/8” bolts to 25 ft-lb. Note: The downrigger weight must be stowed before resetting the swivel pedestal mount. Figure 1 3/8” Tension Bolts 25 ft-lb torque 35 ft-lb torque max Lock Pin Handle Mounting the Pedestal to Your Boat Mounting Directly to Deck or Gunnel Carefully choose an ideal position where you may best utilize your pedestal mount. Use the base of the pedestal as a template to mark hole locations and drill four 9/32" diameter through holes. Fix the pedestal to the deck or gunnel using four 1/4”-20 flat head screws with four flat washers, lock washers, and nuts (not included). To determine the length of screw needed, measure the thickness of deck that you are mounting to and add at least 3/4”. Mounting to Cannon Track Mount For versatility and lightening quick mounting, the Cannon Mounting CAUTION: Track system is ideal for utilizing your pedestal mount on your boat. Slide the The Cannon Pedestal base of the pedestal into the track and tighten the thumb screws to fix the pedes- Mount is intended for use tal in position. You may use a 3/16” Allen wrench for additional tightening. with a Track that is mounted directly to the Note: For the Swivel Pedestal Mount, rotate the release handle to access the top of the thumb screw with the Allen wrench. deck of the boat ONLY. 1904025 Aluminum Mounting Track 6” 1904026 Aluminum Mounting Track 12” 1904027 Aluminum Mounting Track 18” 1904028 Aluminum Mounting Track 24” 1904029 Aluminum Mounting Track 36” Cannon tracks allow for flexible mounting positions and easy removal of Cannon’s track system accessories. Locking grooves allow thumb screws to index with track and prevent accessories from twisting. The system is compatible with Cannon, Bert’s, and Traxtech track system products. Components are made from clear anodized aluminum and stainless steel for strength and corrosion resistance. All mounting hardware included. Available in 6, 12, 18, 24, and 36 inch lengths. Mounting to Cannon Deck Mount The Cannon Deck Mount works great for adding stability and easy removal of your pedestal mount. With your Cannon Deck Mount installed on your boat, attach your pedestal mount by removing the thumb screws and fastening the pedestal base to the plate with four 1/4”-20 x 3/8” long flat head screws. 1904000 Deck Mount The Cannon Deck Mount plate is a four inch by three inch clear anodized aluminum plate which allows the hard mounting of Cannon Dual Axis Rod Holders. The plate com...

Download now

Please, enter two numbers from picture: