Votes - 3, Average rating: 4.3 ( )

Manafacture: Panasonic File size: 1.69 mb File name: Language of manual:

08/01/2006 08/01/2006 The date is printed on the bottom at the center. The date is printed on the bottom right side. The date is printed on the opposite side. Select the orientation of the original according to the orientation of its characters (vertical direction). Select the orientation of the original according to the orientation of its characters (horizontal direction). The cursor is displayed. 2 Move the cursor to the desired position using and . 3 Update the date with the Keypad. 5 Select “OK”. For the following steps, refer to steps 5 to 6 in the Basic Operation for Stamping (see page 61). Chapter More Menus 67 68 Chapter 2 More Menus Features 68 Chapter 2 More Menus Features • Text Stamp The original can be copied with printed text. Up to 32 characters, including A to Z, a to z, 0 to 9, symbols, @, . (Period), _ and space can be printed. The font size is 2.1 mm x 3.1 mm. 1 Select “Text Stamp”. To display this screen, refer to steps 1 to 4 of Basic Operation for Stamping (see page 61). 2 Select the orientation of the original. 3 Select the stamping position of the text stamp. 4 Select “Change”. Select the orientation of the original according to the orientation of its characters (vertical direction). Select the orientation of the original according to the orientation of its characters (horizontal direction). The text stamp is printed on the bottom at the center. The text stamp is printed on the bottom right side. The text stamp is printed on the opposite side. 5 Input text, and then select “OK”. Up to 32 characters. For instructions on how to enter characters, refer to Using the Keyboard in the Operating Instructions (For Function Parameters) on the provided CD-ROM. 6 Select “OK”. For the following steps, refer to steps 5 to 6 in the Basic Operation for Stamping (see page 61). Chapter More Menus 69 70 Chapter 2 More Menus Features 4Select “Zoom / Effects”, and then select “Centering”. 70 Chapter 2 More Menus Features 4Select “Zoom / Effects”, and then select “Centering”. Centering The copying image can be centered automatically on selected paper. This function can be selected when the original is placed on the platen. As the original is placed on the platen, the position of the original may be erroneously detected if influenced by ambient light. If the margin around the original is 5 mm wide or less, the original may not be correctly detected, and the copy image may be unclear. 1 2 3 Open the ADF more than 45 degrees, and then place original(s) on the platen, leave it open. Refer to Placing Originals (Copy) in the Operating Instructions (For Basic Operations) of provided booklet. Press the Copy key if the machine is set to other function mode. Select “More Menus”. 5 Select the desired type of paper, and then select “OK”. 6 7 Enter the desired number of copies. Press the Start key. After finishing copying, press the Reset key to return to the initial screen of the current active mode. 71 Chapter More Menus Repeat Create multiple images on the sheet from single original. You can change to have dotted lines printed between each copy images. Refer to Copier Settings in the Operating Instructions (For Function Parameters) on the provided CD-ROM. This function can be selected when the original is placed on the platen. As the original is placed on the platen, the position of the original may be erroneously detected if influenced by ambient light. If the margin around the original is 5 mm wide or less, the original may not be correctly detected, and the copy image may be unclear. 1Open the ADF more than 45 degrees, and then place original(s) on the platen, leave it open. Refer to Placing Originals (Copy) in the Operating Instructions (For Basic Operations) of provided booklet. 2Press the Copy key if the machine is set to other function mode. 3Select “More Menus”. 4Select “Zoom / Effects”, and then select “Image Repeat”. 5Select the desired type of paper, and then select “OK”. 6Enter the desired number of copies. 7Press the Start key. After finishing copying, press the Reset key to return to the initial screen of the current active mode. The minimum size of the original is 20 mm x 20 mm. 71 Chapter More Menus Repeat Create multiple images on the sheet from single original. You can change to have dotted lines printed between each copy images. Refer to Copier Settings in the Operating Instructions (For Function Parameters) on the provided CD-ROM. This function can be selected when the original is placed on the platen. As the original is placed on the platen, the position of the original may be erroneously detected if influenced by ambient light. If the margin around the original is 5 mm wide or less, the original may not be correctly detected, and the copy image may be unclear. 1Open the ADF more than 45 degrees, and then place original(s) on the platen, leave it open. Refer to Placing Originals (Copy) in the Operating Instructions (For Basic Operations) of provided booklet. 2Press the Copy key if the machine i...

Download now

Please, enter two numbers from picture: