Votes - 3, Average rating: 4 ( )

Manafacture: Sterling File size: 1.53 mb File name: EX_Series.pdf Language of manual:

1-1-2 Safety Symbols Used in This Manual The following safety alert symbols are used to alert you to potential personal injury hazards. Obey all safety messages that follow these symbols to avoid possible injury or death. DANGER indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. WARNING indicates a potentially hazardous situation or practice which, if not avoided, could result in death or serious injury. CAUTION indicates a potentially hazardous situation or practice which, if not avoided, may result in minor or moderate injury, or in property damage. Page 12 1-2 Granulator Specifications Table 1: Granulator Specifications Cutting Circle Throughput Cutting Chamber Rotor Knives Bed Comb Discharge Bin Motor Drive Electrical Components Controls Feed Height Length Width Weight EX909 EX913 EX918 9.7” (247 mm) 9.7” (247 mm) 9.7” (247 mm) 30 lbs./hr (14 kg/hr) 40 lbs./hr (18 kg/hr) 50 lbs./hr (23 kg/hr) 9” x 9” (229 mm x 229 mm) 9” x 13” (229 mm x 330 mm) 9” x 18” (229 mm x 457 mm) Hardened 8620 alloy steel Hardened 8620 alloy steel Hardened 8620 alloy steel Reversible 1/4” (6.4 mm) comb Reversible 1/4" (6.4 mm) comb Reversible 1/4" (6.4 mm) comb 0.70 cu. ft. (.0198 cu. meters) 0.85 cu. ft. (.0241 cu. meters) 1.00 cu. ft. (.0283 cu. meters) 1 hp (.75 kW) 2 hp (1.5 kW) 2 hp (1.5 kW) Cyclodial speed reducer – 34rpm Cyclodial speed reducer – 34rpm Cyclodial speed reducer – 34rpm Start/stop pushbutton Start/stop pushbutton Start/stop pushbutton NEMA type 12 NEMA type 12 NEMA type 12 52” (1321 mm) 52” (1321 mm) 52” (1321 mm) 25.25” (641 mm) 25.25” (641 mm) 25.25” (641 mm) 19” (483 mm) 23” (584 mm) 28” (711 mm) 550 lbs (250 kg) 650 lbs (295 kg) 750 lbs (341 kg) 1-3 Standard Features Standard features of the EX Series Granulator are • 34 RPM rotor speed • 230 or 460 voltages • Segmented rotor comb design • Timing belt drive system with taper lock bushings • Totally-enclosed fan-cooled gear motor • Front hopper cleanout door • NEMA 1 drop-down rear access electrical enclosure with fused disconnect switch • Start-stop control button mounted on NEMA 12 box • Front-access bed comb cam adjusting system • 8620 heat treated cutter segments • Manual discharge bin • Positive break safety switch to interlock hopper and chute doors Page 13 • No Tools Required to open the cutting chamber/segment chamber/hopper chute • Four (4) swivel casters 1-4 Available Options Available standard options for EX Series Granulators include: • Alternate feed chutes. • Alternative voltages: 208/3/60, 380/3/50, 415/3/50, 575/3/60 • Alternate comb tooth sizes .185”(~5MM) and .220”(~6MM), • Vacuum bin design • Bin level-sensing proximity switch and light • Abrasion resistance package • Compressed air venturi Page 14 Shipping Information 2-1 Unpacking and Inspection You should inspect your Ball & Jewell EX Series Screenless Granulator for possible shipping damage. Thoroughly check the equipment for any damage that might have occurred in transit, such as broken or loose wiring and components, loose hardware and mounting screws, etc. 2-2 In the Event of Shipping Damage Important! According to the contract terms and conditions of the Carrier, the responsibilityof the Shipper ends at the time and place of shipment. • Notify the transportation company’s local agent if you discover damage • Hold the damaged goods and packing material for the examining agent’s inspection. Do not return any goods to Ball & Jewell before the transportation company’s inspection and authorization. • File a claim with the transportation company. Substantiate the claim by referring to the agent’s report. A certified copy of our invoice is available upon request. The original Bill of Lading is attached to our original invoice. If the shipment was prepaid, write us for a receipted transportation bill. • Advise Ball & Jewell regarding your wish for assistance and to obtain an RMA (return material authorization) number. Page 15 2-3 If the Shipment is Not Complete Check the packing list as back-ordered items are noted on the packing list. You should have: • Ball & Jewell EX Series Screenless Granulator • Bill of lading • Packing list • Operating and Installation packet • Detailed recommended spare parts list • Electrical schematic and panel layout drawings • Component instruction manuals Re-inspect the container and packing material to see if you missed any smaller items during unpacking. 2-4 If the Shipment is Not Correct If the shipment is not what you ordered, contact the Ball & Jewell shipping department immediately. For shipments in the United States and Canada, call 1 (800) 229-2919; for all other countries, call our international desk at (508) 399-6400. Have the order number and item number available. Hold the items until you receive shipping instructions. 2-5 Returns Important! Do not return any damaged or incorrect items until you receive shippinginstructions from Ball & Jewell. 2-6 Uncrating Your Granulator Prepare in advan...

Download now

Please, enter two numbers from picture: