We are sure you will find it to be reliable and simple to use. The HOMERUN Series Matrix Switchers are designed using state-of-the-art technology and offer a unique combination of features not available anywhere else. We are committed to providing our customers with signal management solutions to the most demanding audio-visual installations. We appreciate your selection of our products and are confident that you will join the ranks of our many satisfied customers throughout the world. This manu
Commands ending in "P" are not executed immediately. The path for outputs on multiple cards or the same card can be loaded. Command Format: [OFFmCnUiP] m = output number (m =1 to 8) n = card ID No. (n = a slot # from 1 to 19) (1 to 8 for MT100-101 or 1 to 4 for MT100-106) P = path Example: If 2 cards are at slot 6 and 7 of unit 3: To enable output 1 and 2 of card 6 and output 3 and 4 of card 7 simultaneously, use the following commands: OFF12C6U3P] [OFF34C7U3P] [SW] If "F" is included use the [O
If a signal is not being received, make sure that the display is compatible with the resolution of the computer graphics card. CONGRATULATIONS! YOU ARE DONE. If you experience any problems, please call 1-800-258-4623 or 1-714-990-2300 for international calls. OPERATION 7 ACCESSORIES 8 Model No. Description RACK MOUNTING ACCESSORIES DA1295RM Mount mini-brackets (2 – “L” shape) CONTACT CLOSURE SWITCH RC5203CC Contact Closure with 6 ft. cable HIGH RESOLUTION 4 BNC to 4 BNC COAXIAL CABLE CB4100MR Bu
Operation of this equipment in a residential area is likely to 2 SWITCHERS cause harmful interference in which case the user will be required to correct the interference at his own expense. • Any changes or modifications to the unit not expressly approved by Altinex, Inc. could void the user’s authority to operate the equipment. ABOUT YOUR SWITCHER 2 The DA1916SX is a 2-in, 1-out VGA (VGA/SVGA/XGA) Auto Switcher with manual remote capability through the use of a contact closure. The DA1916SX aut
When the contact closure control is connected to the DA1917SX, an “open” position will select Input 1 and a “closed” position will select Input 2. Although the DA1917SX is designed primarily to handle VGA-type (RGBHV) signals, it can also be used to pass Composite Video, S-Video, and Component Video signals through its Red, Green, and Blue channels. This may require the use of adapter cables to convert from a 15-pin HD connector to BNC connectors. The DA1917SX is perfect for applications that re
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions found herein, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his expense. • Any changes or modifications to the unit not expressly approved by ALTINEX, Inc. could void the user’s authority to
We are sure you will find it a reliable and useful product. Superior performance for the right price backed by solid technical and customer support is what we have to offer. The product you are holding in your hands is designed using state-of-the-art technology and is superior to anything available on the market. You will find this and our other products reliable, long lasting, and simple to operate. We are committed to providing our customers with solutions to the most demanding audio-visual in
It is equal to the enclosure slot number in which the card is installed. The value can range from 1 to 4 up to 1 to 20 depending on the enclosure. Card ID 0 (C0) is used for the controller. See the MT100-100 User’s Guide for details. The Group ID is a number representing a group of cards defined with the [WR] command. When using the Group ID, all cards in the group will perform the given instruction. Changing the position of a card will significantly affect the commands recorded on software defi
7. […F] – Feedback After processing a command, an OK or ER will be returned as feedback if "F" is included at the end of a command string. 8. […P] – Path This command will set the path for the output, but it is not active until the switch command, [SW], is executed. Commands ending in "P" are not executed immediately. The path for outputs on multiple cards or the same card can be preloaded. See examples in ON and OFF commands. 9. [SW] – Switch The switch command immediately connects inputs and o
4. [?] This command will return general information about the Multi-Tasker™ and cards installed in the unit. Command Format: [?Ui] Ui = Unit ID (i= from 0 to 9) Example: A Multi-Tasker™ with Unit ID 1 has a front panel with part number MT101-101 and contains an MT103-122, MT103-123 and MT105-100. Send the command [?U1] and receive the following feedback: [(MT101-101U1)(MT103-122C01) (MT103-123C02)(MT105-100C05)] MT101-101U1 = Panel Number and Unit ID MT103-122C01 = An MT103-122 is in slot 1 MT10