Votes - 3, Average rating: 4.3 ( )

Manafacture: Panasonic File size: 292.52 kb File name: HQ2181GH.PDF Language of manual:

If there is no alternative, the cord should be a UL listed 3-wire grounding type, rated 250 volts with a minimum current carrying rating of 15 amps-number 14 or heavier wire. 9. Do not install the unit close to any place where inflammable gas, fumes or soot may be generated. 10. Do not unplug the unit while it is operating. PLEASE KEEP THIS BOOKLET FOR FUTURE REFERENCE You should note both the model and serial numbers of this product in the spaces provided. Retain this book along with a copy of your purchase receipt for future reference. Model Number_ Serial Number_ Dealer’s Name_ Date Purchased_ TABLE OF CONTENTS Page Product Component Identification..................................................2 Front Grille Installation....................................................................................2 How to Operate (HQ2181GH, HQ2201GH)........................................................................3 Care and Maintenance....................................................................................4 Air Direction Control............................................................................................4 How To Attach Drain Pan............................................................................5 Before Calling for Service..........................................................................5 Product Specifications......................................................................................6 PRODUCT COMPONENT IDENTIFICATION {HQ2181GH, HQ2201GH) Installation Parts [Refer to Installation Instructions 'enclosed with product Cabinet Horizontal Air-Direction Vane Vertical Air-Direction Vane Cool Air Outlet Front Grille Air Filter Air Intake Grille Door Power Supply Cord Base Pan Compressor Condenser Coil Evaporator Coil Fan Motor Stopper Drain Tray-STYROFOAM HOW TO ATTACH GRILLE Depending upon the location of the AC outlet, route AC cord to either left or right side while installing the front grille. The grille is attached to the front of the cabinet by four tabs and a screw. STEP 1 Open the grille door, and then remove air-filter from the grille by sliding it to right. STEP 2 Engage two tabs on the grille's top inside edge with two slots in the cabinet front edge. STEP 3 Press inward on the lower right side of the metal cabinet at the location of the slot and then carefully push the grille in until the tab engages with the slot. Do not strike or forcibly hit the plastic grille otherwise damage to the tabs will occur. STEP 4 Repeat this process for the lower left side. STEP 5 Mount the grille on front of the cabinet with the screw attached to grille during shipping, and slide the filter back into place. HOW TO REMOVE GRILLE STEP 1 Open the grille door, and then remove air-filter from the grille by sliding it to right. STEP 2 Remove and save the screw that holds the grille to the chassis. STEP 3 Press inward on the lower right side of the cabinet unti...

Download now

Please, enter two numbers from picture: